Small Business Research
The support to Small Business Research aims at innovation and is provided in the following modalities:
- Liquid fermentation of microbial control agents for pests and diseases, AP.PIPE
Abstract
Recently many researches have been carried out mainly in the area of production of viable and infectious propagules of entomopathogenic fungi as well as antagonistic fungi such as Trichoderma ssp.. These works allowed the beginning of a revolution in the area of mass production of such organisms and now it becomes necessary to make feasible such methodologies for industrial scale in Bra...
- Development of an algorithm to evaluate the influence of inputs on yield gaps, beside its return on investments, AP.PIPE
Abstract
Agriculture is a very important sector of the economy. However, the difficulty of the producer in determining Return on Investment (ROI) on the inputs used hampers the adoption of new technologies. This is because many factors interfere with crop yields, which makes it difficult to segment input interference on productivity. However, through the Yield Gap (YG) concept, it is possible to...
- VITA Technology for the screening and diagnosis of cervical cancer, AP.PIPE
Abstract
Cervical cancer is responsible for thousands of deaths of women in Brazil. Cervical cancer also leads to high costs in treatment, despite being an easy to diagnose illness with lots of research done about cervical cancer detection and diagnosis. Project VITA is an initiative that integrates technologies to offer efficient, low-cost, and socially designed solutions for cervical cancer di...
(Only some records are available in English at this moment)
- Impedance probe for sensing the process of extraction in sugar cane diffusers and other fibrous materials, AP.PIPE
Abstract
The use of diffusers in the processing of different types of biomass (cane sugar, beet sugar, acacia bark, orange, etc.) is widely used in Brazil and abroad. However, the currently available technologies do not provide new extraction efficiencies and/or energy. Therefore, it is necessary to increase the local mass transfer rates in the leaching process, which demands a tomographic tech...
- Recycled PET drying and dehumidifying by infrared irradiation, AP.PIPE
Abstract
This proposal aims to study the feasibility of implanting a PET bottle recycled scraps drying system using infrared (IR) irradiation. The process conventionally used is convective drying through dry air flow and heated in silos developed for that purpose. The principle of IR irradiation drying is based on the heating of PET flakes provided by the absorption of this radiation by the PET ...
- Threat intelligence as a service, AP.PIPE
Abstract
Identifying, treating and preventing attacks and security incidents in computer systems and information has become increasingly important and challenging. The exponential increase in the amount of digital information and electronic services also raises the risk of attacks, damage and destruction of information and services. The attacks may range from financial fraud, sabotage, theft of ...
(Only some records are available in English at this moment)
- Motion capture via MEMS-type inertial sensors and low-cost magnetometers for biomechanical applications, BP.TT
- 3D software package for designing photovoltaic systems under partial shading conditions, BP.TT
- SPD-Tech: console development for dynamic positioning training, BP.TT
(Only some records are available in English at this moment)
- SMAA 7 - Environmental Monitoring System Aquatic, BP.TT
- Four-stroke laser engine system: breakdown project, BP.TT
- Vacuum sanitary system: AeroEcological sanitary, BP.PIPE
(Only some records are available in English at this moment)
- Synthesis and characterization of bioresponsive nanodevices for site-targeted release of siRNA for treatment of rheumatoid arthritis, BE.EP.PD
Abstract
The first part of this project was dedicated to the synthesis and characterization of new derivatives of chitosan, focusing the improvement of the stability and buffering capacity of the nanoparticles. Derivatives were synthesized (CH-DEAE15-PEG, QO-DEAE9 and QDDEAE50) and characterized by 1H NMR, FTIR and gel permeation chromatography. The improvement of nanoparticle´s stability was co...
- Liquid fermentation of microbial control agents for pests and diseases, AP.PIPE
Abstract
Recently many researches have been carried out mainly in the area of production of viable and infectious propagules of entomopathogenic fungi as well as antagonistic fungi such as Trichoderma ssp.. These works allowed the beginning of a revolution in the area of mass production of such organisms and now it becomes necessary to make feasible such methodologies for industrial scale in Bra...
- Development of an algorithm to evaluate the influence of inputs on yield gaps, beside its return on investments, AP.PIPE
Abstract
Agriculture is a very important sector of the economy. However, the difficulty of the producer in determining Return on Investment (ROI) on the inputs used hampers the adoption of new technologies. This is because many factors interfere with crop yields, which makes it difficult to segment input interference on productivity. However, through the Yield Gap (YG) concept, it is possible to...
- VITA Technology for the screening and diagnosis of cervical cancer, AP.PIPE
Abstract
Cervical cancer is responsible for thousands of deaths of women in Brazil. Cervical cancer also leads to high costs in treatment, despite being an easy to diagnose illness with lots of research done about cervical cancer detection and diagnosis. Project VITA is an initiative that integrates technologies to offer efficient, low-cost, and socially designed solutions for cervical cancer di...
(Only some records are available in English at this moment)
- Impedance probe for sensing the process of extraction in sugar cane diffusers and other fibrous materials, AP.PIPE
Abstract
The use of diffusers in the processing of different types of biomass (cane sugar, beet sugar, acacia bark, orange, etc.) is widely used in Brazil and abroad. However, the currently available technologies do not provide new extraction efficiencies and/or energy. Therefore, it is necessary to increase the local mass transfer rates in the leaching process, which demands a tomographic tech...
- Recycled PET drying and dehumidifying by infrared irradiation, AP.PIPE
Abstract
This proposal aims to study the feasibility of implanting a PET bottle recycled scraps drying system using infrared (IR) irradiation. The process conventionally used is convective drying through dry air flow and heated in silos developed for that purpose. The principle of IR irradiation drying is based on the heating of PET flakes provided by the absorption of this radiation by the PET ...
- Threat intelligence as a service, AP.PIPE
Abstract
Identifying, treating and preventing attacks and security incidents in computer systems and information has become increasingly important and challenging. The exponential increase in the amount of digital information and electronic services also raises the risk of attacks, damage and destruction of information and services. The attacks may range from financial fraud, sabotage, theft of ...
(Only some records are available in English at this moment)
- Motion capture via MEMS-type inertial sensors and low-cost magnetometers for biomechanical applications, BP.TT
- 3D software package for designing photovoltaic systems under partial shading conditions, BP.TT
- SPD-Tech: console development for dynamic positioning training, BP.TT
(Only some records are available in English at this moment)
- SMAA 7 - Environmental Monitoring System Aquatic, BP.TT
- Four-stroke laser engine system: breakdown project, BP.TT
- Vacuum sanitary system: AeroEcological sanitary, BP.PIPE
(Only some records are available in English at this moment)
- Synthesis and characterization of bioresponsive nanodevices for site-targeted release of siRNA for treatment of rheumatoid arthritis, BE.EP.PD
Abstract
The first part of this project was dedicated to the synthesis and characterization of new derivatives of chitosan, focusing the improvement of the stability and buffering capacity of the nanoparticles. Derivatives were synthesized (CH-DEAE15-PEG, QO-DEAE9 and QDDEAE50) and characterized by 1H NMR, FTIR and gel permeation chromatography. The improvement of nanoparticle´s stability was co...
Left-click and hold. Drag the cursor on the map until you see the view you want.
Linha de fomento
Select year: |
Show years by sequential order |