| Grant number: | 26/01107-3 |
| Support Opportunities: | Regular Research Grants |
| Start date: | July 01, 2026 |
| End date: | June 30, 2029 |
| Field of knowledge: | Health Sciences - Dentistry |
| Principal Investigator: | Rafael Pino Vitti |
| Grantee: | Rafael Pino Vitti |
| Host Institution: | Faculdade de Odontologia de Piracicaba (FOP). Universidade Estadual de Campinas (UNICAMP). Piracicaba , SP, Brazil |
| City of the host institution: | Piracicaba |
| Associated researchers: | Flávio Henrique Baggio Aguiar ; Giselle Maria Marchi |
| Associated scholarship(s): | 26/19874-0 - Wettability and surface roughness of 3Y-TZP zirconia subjected to a sustainable surface treatment using recycled lithium disilicate powder, BP.IC |
Abstract
Zirconia has been widely used in indirect restorations due to its favorable mechanical properties. However, its polycrystalline structure and the absence of a glassy phase represent major limitations for achieving a stable bonding with resin luting agents. In this context, an experimental surface treatment protocol based on the use of recycled lithium disilicate powder obtained from milled CAD/CAM block residues is proposed as an alternative approach to enhance zirconia adhesion. Therefore, the aim of this study is to evaluate the physicomechanical properties and adhesive performance of 3Y-TZP subjected to different surface treatments. To obtain the experimental powder, lithium disilicate block residues (IPS e.max® CAD, Ivoclar) will be processed by grinding and sieving to achieve a particle size of 400 µm, and the final product will be characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Specimens of 3Y-TZP (IPS e.max® ZirCAD MT, Ivoclar) will be fabricated and allocated into six groups according to the surface treatment: ST (negative control) - no treatment; JAT (positive control) - airborne-particle abrasion with aluminum oxide (50 µm) followed by ultrasonic cleaning (5 min); LIS - spray application of lithium silicate followed by sintering at 920ºC (LiSi Conditioner, Ellaboro); LIS + HF - spray application of lithium silicate followed by sintering at 920ºC and etching with 5% hydrofluoric acid; DSP - application of recycled lithium disilicate powder followed by sintering at 920ºC; and DSP + HF - application of recycled lithium disilicate powder followed by sintering at 920ºC and etching with 5% hydrofluoric acid. The treated surfaces will be analyzed for elemental composition (EDS), phase stability (XRD), wettability (contact angle), and surface topography (roughness). In addition, the effect of the surface treatments on the structural integrity of the ceramic will be assessed by biaxial flexural strength testing and Weibull reliability analysis. For adhesive evaluation, each surface treatment group will be further subdivided according to the dual-cure resin luting agents tested: adhesive system (Scotchbond¿ Universal Plus + RelyX¿ Ultimate, Solventum) and self-adhesive cement (RelyX¿ U200, Solventum). Tygon tubes (0.75 mm internal diameter × 0.5 mm height) will be positioned on the treated 3Y-TZP surfaces, filled with the resin luting agents, and light-cured at an irradiance of 1,400 mW/cm² for 10 s (VALO Cordless, Ultradent). After cementation, half of the specimens will be stored in distilled water at 37ºC for 24 h, while the remaining specimens will be subjected to thermocycling (30,000 cycles between 5 and 55ºC, 30 s dwell time). Subsequently, microshear bond strength testing will be performed using a universal testing machine (Instron 4411). Failure modes will be classified as adhesive, cohesive within the resin luting agent, or mixed. A pilot study will be conducted to obtain preliminary data, followed by sample size calculation to define the final number of specimens per group (n). Data will be analyzed for normality (Shapiro-Wilk test) and homoscedasticity (Levene's test) to determine the use of parametric or nonparametric statistical tests, with a significance level set at 5%. (AU)
| Articles published in Agência FAPESP Newsletter about the research grant: |
| More itemsLess items |
| TITULO |
| Articles published in other media outlets ( ): |
| More itemsLess items |
| VEICULO: TITULO (DATA) |
| VEICULO: TITULO (DATA) |