Biomechanical behavior and survival of implant-supported hybrid ceramic crowns manufactured by different techniques

• Grant number: 17/09104-4
• Support Opportunities: Scholarships in Brazil - Doctorate
• Start date: March 01, 2018
• End date: July 31, 2020
• Field of knowledge: Health Sciences - Dentistry
• Principal Investigator: Marco Antonio Bottino
• Grantee: João Paulo Mendes Tribst
• Host Institution: Instituto de Ciência e Tecnologia (ICT). Universidade Estadual Paulista (UNESP). Campus de São José dos Campos. São José dos Campos , SP, Brazil
• Associated scholarship(s): 18/07404-3 - Influence of surface treatments before staining on the wear resistance of a hybrid ceramic, BE.EP.DR

Abstract

This study aims to evaluate the biomechanical behavior and survival of hybrid ceramic crowns (Vita Enamic, Vita Zahnfabrick, Bad Säckingen, Germany) obtained by different manufacturing techniques. For this, 69 implant analogues will be installed in polyurethane cylinders. Each analogue will receive a universal titanium base that will be scanned to obtain a molar ceramic crown (element 37). Specimens will be divided into three groups (n = 23), according to the prosthetic solution to be used: crown cemented to a mesostructure screwed to the abutment (CME group); monolithic crown cemented on the abutment (MC group); and, monolithic crown screwed to the abutment (MP group). The crowns of CME and MC groups will be cemented on the abutment with resin cement and the crowns of MP group will be screwed with a torque of 35 N/cm. Then, specimens will be submitted to mechanical fatigue in the range of 2 x 106 cycles (2 Hz). Failure mode will be evaluated through stereomicroscopy and Scanning Electron Microscopy (SEM) and the images will be analyzed qualitatively. Also, an in silico evaluation of stress distribution in the structures will be performed through Finite Element Analysis (FEA). Fatigue test data will be analyzed through pertinent statistics. (AU)

Scientific publications

(9)

(References retrieved automatically from Web of Science and SciELO through information on FAPESP grants and their corresponding numbers as mentioned in the publications by the authors)

PIVA, AMANDA MARIA DE OLIVEIRA DAL; TRIBST, JOAO PAULO MENDES; JALKH, ERNESTO BYRON BENALCAZAR; ANAMI, LILIAN COSTA; BONFANTE, ESTEVAM AUGUSTO; BOTTINO, MARCO ANTONIO. Minimal tooth preparation for posterior monolithic ceramic crowns: Effect on the mechanical behavior, reliability and translucency. Dental Materials, v. 37, n. 3, p. E140-E150, MAR 2021. (12/19078-7, 17/23059-1, 18/03984-5, 18/03072-6, 17/09104-4, 17/11535-3)

MENDES TRIBST, JOAO PAULO; DE OLIVEIRA DAL PIVA, AMANDA MARIA; OEZCAN, MUTLU; SOUTO BORGES, ALEXANDRE LUIZ; BOTTINO, MARCO ANTONIO. Influence of Ceramic Materials on Biomechanical Behavior of Implant Supported Fixed Prosthesis with Hybrid Abutment. EUROPEAN JOURNAL OF PROSTHODONTICS AND RESTORATIVE DENTISTRY, v. 27, n. 2, p. 76-82, JUN 2019. (17/23059-1, 17/09104-4)

MENDES TRIBST, JOAO PAULO; DE OLIVEIRA DAL PIVA, AMANDA MARIA; SOUTO BORGES, ALEXANDRE LUIZ; BOTTINO, MARCO ANTONIO. Different combinations of CAD/CAM materials on the biomechanical behavior of a two-piece prosthetic solution. INTERNATIONAL JOURNAL OF COMPUTERIZED DENTISTRY, v. 22, n. 2, p. 171-176, SUM 2019. (17/23059-1, 17/09104-4)

TRIBST, JOAO P. M.; DAL PIVA, AMANDA M. O.; BORGES, ALEXANDRE L. S.; ANAMI, LILIAN C.; KLEVERLAAN, CORNELIS J.; BOTTINO, MARCO A.. Survival Probability, Weibull Characteristics, Stress Distribution, and Fractographic Analysis of Polymer-Infiltrated Ceramic Network Restorations Cemented on a Chairside Titanium Base: An In Vitro and In Silico Study. MATERIALS, v. 13, n. 8, APR 2020. (17/23059-1, 17/09104-4, 18/07404-3)

JOÃO PAULO MENDES TRIBST; AMANDA MARIA DE OLIVEIRA DAL PIVA; ALEXANDRE LUIZ SOUTO BORGES; MARCO ANTONIO BOTTINO. Influência do material cerâmico das coroas e dos pilares híbridos na distribuição de tensão de próteses implanto-suportadas. Rev. odontol. UNESP, v. 47, n. 3, p. 149-154, 2018-06-00. (17/09104-4)

TRIBST, JOAO PAULO M.; DAL PIVA, AMANDA M. O.; BOTTINO, MARCO ANTONIO; NISHIOKA, RENATO S.; BORGES, ALEXANDRE L. S.; OZCAN, MUTLU. Digital Image Correlation and Finite Element Analysis of Bone Strain Generated by Implant-Retained Cantilever Fixed Prosthesis. EUROPEAN JOURNAL OF PROSTHODONTICS AND RESTORATIVE DENTISTRY, v. 28, n. 1, p. 10-17, MAR 2020. (17/09104-4)

MENDES TRIBSTA, JOAO PAULO; DE OLIVEIRA DAL PIVA, AMANDA MARIA; GONCALVES, NATALIA INES; SOUTO BORGES, ALEXANDRE LUIZ; BOTTINO, MARCO ANTONIO; KLEVERLAAN, CORNELIS JOHANNES. Polymerization Shrinkage and Push-out Bond Strength of Different Composite Resins for Sealing the Screw-access Hole on Implant-supported Crowns. Journal of Adhesive Dentistry, v. 22, n. 5, p. 8-pg., 2020-09-01. (18/07404-3, 17/09104-4)

TRIBST, J. P. M.; DAL PIVA, A. M. O.; ANAMI, L. C.; BORGES, A. L. S.; BOTTINO, M. A.. Influence of implant connection on the stress distribution in restorations performed with hybrid abutments. JOURNAL OF OSSEOINTEGRATION, v. 11, n. 3, p. 507-512, SEP 2019. (17/09104-4)

TRIBST, JOAO P. M.; DAL PIVA, AMANDA M. O.; WERNER, ARIE; ANAMI, LILIAN C.; BOTTINO, MARCO A.; KLEVERLAAN, CORNELIS J.. Durability of staining and glazing on a hybrid ceramics after the three-body wear. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, v. 109, SEP 2020. (18/05908-4, 17/09104-4, 18/07404-3, 18/03984-5)

Academic Publications

(References retrieved automatically from State of São Paulo Research Institutions)

TRIBST, João Paulo Mendes. Biomechanical behavior and survival of implant-supported hybrid ceramic crowns manufactured by different techniques. 2020. Doctoral Thesis - Universidade Estadual Paulista (Unesp). Instituto de Ciência e Tecnologia. São José dos Campos São José dos Campos.