Márcio Raymundo Morelli
CV Lattes
Universidade Federal de São Carlos (UFSCAR). Centro de Ciências Exatas e de Tecnologia (CCET) (Institutional affiliation for the last research proposal) Birthplace: Brazil
graduate at Engenharia de Materiais from Universidade Federal de São Carlos (1983), master's at Material and Metallurgical Engineering from Universidade Federal de São Carlos (1987) and ph.d. at Materials Science from University of Oxford (1995). Has experience in Material and Metallurgical Engineering, focusing on Ceramics, acting on the following subjects: sinterização, revestimento cerâmico, reação de combustão, cimento portland and processamento. (Source: Lattes Curriculum)
- Rationalization of the use and previsibility of tonalities in the execution of the ceramic glazing decoration, AP.R
Abstract
Traditional ceramics industry uses a variety of dyes and pigments in ware decoration. As a rule, the need to keep the number of pigments to a minimum has been met empirically, resulting in an optimized colour pallet which satisfies the decorative demands of ceramic glazes and enables the highest variety of colour shades. The main objective of this work is the development of a methodolog...
- Synthesis of KBiFe2O5 phase (KBFO) with perovskite type structure with potential for application in solar cells, BP.MS
Abstract
The search for renewable energy sources is something widespread in society, because the non-renewable sources have the same scarce and yet they disfavor the environment, as well as, have a great interest in solar energy, because the sun is a clean source and in practically inexhaustible. As solar cells are triggered by a solar power converter in electric power, this way, the search acqu...
- Nb2O5/Ta2O5 + Sc2O3 codoped zirconia as a thermal barrier coating for turbines application, BP.DR
Abstract
Turbines are fundamental systems for current technology. Some decades ago, research on turbines were restricted to aircraft science. However, the high future energy demand has introduced a wide spread use of land gas turbines for electrical energy generation. Both applications cited require high energy efficiency, in addition to the trend toward use of fuels of low quality. For this gen...
- Development of geopolymer ceramic filters for foundry with incorporation of fly ash, BP.DR
Abstract
The alkaline activation of silica-alumina has been promoting the rediscovery of techniques most likely already used earlier by man and that, in spite of being lost in the labyrinths of history have left their mark and remarkable achievements are admired today. In particular, are known works of classical antiquity, such as the Coliseum and the Pantheon in Roman and the Baths of Caracalla...
- Synthesis and characterization of perovskites with potential application in photovoltaic systems, BE.PQ
Abstract
The search for renewable energy sources is widespread in society, since non-renewable sources have their scarce reserves and still disfavor the environment, so scientists have a great interest in solar energy since the sun is a clean source and practically inexhaustible. Solar cells are devices responsible for converting light energy into electrical energy. In this way, it is sought to ...
- Conventional process and new methods of obtaining porous geopolymers structures, BE.EP.DR
Abstract
The geopolymers emerges as products easy to perform, using the same raw materials and waste streams or inorganic industrial solid waste, resulting in products with interesting behavior not only of the mechanical point of view, but also the high level of chemical resistance to most of which have of aggressive media and excellent fire behavior and can be considered as refractory materials...
| 7 / 1 | Completed research grants |
| 1 / 1 | Ongoing scholarships in Brazil |
| 17 / 2 | Completed scholarships in Brazil |
| 1 / 1 | Ongoing scholarships abroad |
| 1 / 1 | Completed scholarships abroad |
| 27 / 6 | All research grants and scholarships |
| Associated processes | |
(References retrieved automatically from Web of Science and SciELO through information on FAPESP grants and their corresponding numbers as mentioned in the publications by the authors)
| Publications | 14 |
| Citations | 105 |
| Cit./Article | 7.5 |
| Data from Web of Science | |
ROGER HONORATO PIVA; DIÓGENES HONORATO PIVA; MÁRCIO RAYMUNDO MORELLI. Synthesis by coprecipitation of india-stabilized zirconia and codoping with MoO3, WO3, TaO2.5, or NbO2.5 for application as thermal barrier coatings. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, v. 19, n. 1, p. 31-39, Fev. 2016. (13/14189-8)
SETZ‚ LFG; SANTACRUZ‚ I.; COLOMER‚ MT; MELLO-CASTANHO‚ SRH; MORENO‚ R.. Fabrication of Sr-and Co-doped lanthanum chromite interconnectors for SOFC. Materials Research Bulletin, v. 46, n. 7, p. 983, 2011.
FREDERICCI‚ C.; MORELLI‚ MR. Corrosion of AZS and AZ crucibles in contact with a blast-furnace slag-based glass. Materials Research Bulletin, v. 35, n. 14, p. 2503-2514, 2000.
COIMBRA, MATEUS ALVES; SANTOS, W. N. DOS; MORELLI, MARCIO RAYMUNDO. Recuperação de resíduos inorgânicos para a construção civil. Cerâmica, v. 48, n. 306, p. 44-48, abr.-jun. 2002.
SETZ, L. F. G.; SANTACRUZ, I.; COLOMER, M. T.; MELLO-CASTANHO, S. R. H.; MORENO, R.. Fabrication of Sr- and Co-doped lanthanum chromite interconnectors for SOFC. Materials Research Bulletin, v. 46, n. 7, p. 983-986, JUL 2011. Web of Science Citations: 8.
KLEGUES MONTEDO, OSCAR RUBEM; FALLER, CRISTIAN ARNALDO; BERTAN, FERNANDO MARCO; JIUSTI, JEANINI; PIVA, ROGER HONORATO; PIVA, DIOGENES HONORATO. Microstructural development and electrical behavior during crystalization of iron-rich glass-ceramics obtained from mill scale. CERAMICS INTERNATIONAL, v. 43, n. 15, p. 11864-11873, OCT 15 2017. Web of Science Citations: 2. (13/14189-8)
CILLA, MARCELO S.; DE MELLO INNOCENTINI, MURILO D.; MORELLI, MARCIO R.; COLOMBO, PAOLO. Geopolymer foams obtained by the saponification/peroxide/gelcasting combined route using different soap foam precursors. Journal of the American Ceramic Society, v. 100, n. 8, p. 3440-3450, AUG 2017. Web of Science Citations: 7. (11/22290-5, 12/14581-2)
PIVA, R. H.; PIVA, D. H.; MONTEDO, O. R. K.; MORELLI, M. R.. Improving physical properties of cubic InO1.5-stabilized zirconia by alloying with MoO3. Journal of Alloys and Compounds, v. 685, p. 593-603, NOV 15 2016. Web of Science Citations: 2. (13/14189-8)
PIVA, DIOGENES HONORATO; PIVA, ROGER HONORATO; ROCHA, MARINA CAMPOS; KLEGUES MONTEDO, OSCAR RUBEM; MORELLI, MARCIO RAYMUNDO. Resistance of InO1.5-stabilized tetragonal zirconia polycrystals to low-temperature degradation. Materials Letters, v. 163, p. 226-230, JAN 15 2016. Web of Science Citations: 1. (13/14189-8)
PIVA, D. H.; PIVA, R. H.; ROCHA, M. C.; DIAS, J. A.; MONTEDO, O. R. K.; MALAVAZI, I.; MORELLI, M. R.. Antibacterial and photocatalytic activity of ZnO nanoparticles from Zn(OH)(2) dehydrated by azeotropic distillation, freeze drying, and ethanol washing. ADVANCED POWDER TECHNOLOGY, v. 28, n. 2, p. 463-472, FEB 2017. Web of Science Citations: 9. (13/14189-8)
PIVA, R. H.; PIVA, D. H.; MORELLI, M. R.. Thermal stability and phase transformation in fully indium oxide (InO1.5) stabilized zirconia. MATERIALS CHARACTERIZATION, v. 123, p. 58-66, JAN 2017. Web of Science Citations: 1. (13/14189-8)
L. F. G. SETZ; H. P. S. CORRÊA; S. R. H. MELLO-CASTANHO. Comportamento de sinterização do LaCrO3 dopado com Sr e Co. Cerâmica, v. 57, n. 343, p. 310-318, Set. 2011.
SETZ, LUIZ F. G.; SILVA, ANTONIO C.; SANTOS, SILAS C.; MELLO-CASTANHO, SONIA R. H.; MORELLI, MARCIO R.. A viscoelastic approach from alpha-Al2O3 suspensions with high solids content. Journal of the European Ceramic Society, v. 33, n. 15-16, p. 3211-3219, DEC 2013. Web of Science Citations: 5.
ROGER HONORATO PIVA; DIÓGENES HONORATO PIVA; MÁRCIO RAYMUNDO MORELLI. Synthesis by coprecipitation of india-stabilized zirconia and codoping with MoO3, WO3, TaO2.5, or NbO2.5 for application as thermal barrier coatings. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, v. 19, n. 1, p. 31-39, Fev. 2016. Web of Science Citations: 2. (13/14189-8)
MONTEDO, O. R. K.; ALVES, I. T.; FALLER, C. A.; BERTAN, F. M.; PIVE, D. H.; PIVA, R. H.. Evaluation of electrical properties of glass-ceramics obtained from mill scale. Materials Research Bulletin, v. 72, p. 90-97, DEC 2015. Web of Science Citations: 7. (13/14189-8)
PIVA, R. H.; PIVA, D. H.; PIERRI, J. J.; MONTEDO, O. R. K.; MORELLI, M. R.. Azeotropic distillation, ethanol washing, and freeze drying on coprecipitated gels for production of high surface area 3Y-TZP and 8YSZ powders: A comparative study. CERAMICS INTERNATIONAL, v. 41, n. 10, B, p. 14148-14156, DEC 2015. Web of Science Citations: 6. (13/14189-8)
PIVA, R. H.; PIVA, D. H.; VENTURINI, J.; FLORIANO, R.; MORELLI, M. R.. Inhibition of order-disorder phase transition and improvements in the BICUVOX.1 properties by using yttria-stabilized zirconia particles. CERAMICS INTERNATIONAL, v. 41, n. 1, A, p. 171-177, JAN 2015. Web of Science Citations: 5. (13/14189-8)
L. F. G. SETZ; S. R. H. MELLO-CASTANHO; M. R. MORELLI. Cromito de lantânio: material para interconectores de células a combustível de óxido sólido - uma revisão. Cerâmica, v. 61, n. 357, p. 60-70, Mar. 2015. (13/09329-5)
CILLA, MARCELO STROZI; MORELLI, MARCIO RAYMUNDO; COLOMBO, PAOLO. Open cell geopolymer foams by a novel saponification/peroxide/gelcasting combined route. Journal of the European Ceramic Society, v. 34, n. 12, p. 3133-3137, OCT 2014. Web of Science Citations: 30. (12/14581-2)
CILLA, MARCELO STROZI; MORELLI, MARCIO RAYMUNDO; COLOMBO, PAOLO. Effect of process parameters on the physical properties of porous geopolymers obtained by gelcasting. CERAMICS INTERNATIONAL, v. 40, n. 8, B, p. 13585-13590, SEP 2014. Web of Science Citations: 20. (12/14581-2)
L. F. G. SETZ; S. R. H. MELLO-CASTANHO; I. SANTACRUZ; R. MORENO; M. T. COLOMER. Influência da atmosfera na sinterização do cromito de lantânio dopado. Cerâmica, v. 59, n. 351, p. 366-371, Set. 2013.