Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

Synthesis and characterization of PMMA and organic modified montmorilonites nanocomposites via in situ polymerization assisted by sonication

Texto completo
Autor(es):
Prado, Bruna Rosa [1] ; Bartoli, Julio Roberto [1]
Número total de Autores: 2
Afiliação do(s) autor(es):
[1] Univ Estadual Campinas, Sch Chem Engn, Dept Mat Engn & Bioproc, BR-13083970 Campinas, SP - Brazil
Número total de Afiliações: 1
Tipo de documento: Artigo Científico
Fonte: APPLIED CLAY SCIENCE; v. 160, n. SI, p. 132-143, AUG 2018.
Citações Web of Science: 2
Resumo

A variety of organo-modified montmorillonite (OMMT) and poly(methylmethacrylate) (PMMA) nanocomposites (CPN) were synthetized by in situ polymerization in a chloroform solution under probe sonication at clay loadings of 3 mass%. A factorial experimental design was used to study the effects of the synthesis variables: Flory-Huggins (F-H) interaction parameters between PMMA and clay organomodifier (three grades of OMMT) and sonication energy (26.0 kJ, 30.3 kJ and 34.6 kJ), aiming clay dispersion at nanoscale levels into the polymeric matrix and improvements in CPN properties. The distinct surfactant side groups of commercial OMMT were: hydroxyl (C30B), aryl (C10A) or alkyl (C25A), considering their similar interlayer space. Multiple techniques of analysis to evaluate the level of clay dispersion were used. Small-amplitude oscillatory shear rheology (SAOS) indicated a high level of clay dispersion for the PMMA/C25A CPN and a tendency to form a percolated network structure from the low shear thinning exponent n(omega) of complex viscosity, either at low (n(omega) = -0.97) or high (n(omega)= -0.83) sonication energy. However, the rheological results showed a low level of clay dispersion for PMMA/C10A (n(omega) = -0.70) and PMMA/C30B (n(omega) = - 0.40). The F-H interaction parameter was the statistically significant factor for the shear thinning exponent n(omega) response. X-ray diffraction (XRD) of CPN exhibited no discernible reflections for PMMA/C25A-26 kJ and PMMA/C10A-30.3 kJ CPN, suggesting that a high level of clay dispersion was achieved. Transmission electronic microscopy (TEM) images of PMMA/C25A-36.4 kJ and PMMA/C3OB-26 kJ CPN showed exfoliated/intercalated and intercalated morphologies, respectively. Thermogravimetry presented a significant increase in PMMA chain scission temperature of up to 82 degrees C for all CPN when compared to pristine PMMA. The UV-visible transmittance of PMMA/C25A-26 kJ CPN showed to be around 4.5% lower in comparison with pristine PMMA. The CPN refractive index showed a slight reduction, which could even candidate them for new materials in optical electronic devices. The improvements in the verified properties for PMMA/C25A CPN were attributed to the lower F-H interaction parameter of C25A alkyl surfactant with chloroform when considering the others OMMT side groups. The chemical affinity of the alkyl chain to the chloroform could contribute to the diffusion of the solvent/monomer solution into the interlayer space of the clay, prior to polymerization, and then the polymer chain growth to push the layers apart. (AU)

Processo FAPESP: 09/54140-2 - EMU: Laboratório Multiusuário para caracterização térmica de materiais
Beneficiário:Jorge Alberto Soares Tenório
Linha de fomento: Auxílio à Pesquisa - Programa Equipamentos Multiusuários