Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

Sintering and Creep Resistance of Powder-Metallurgy-Processed Ti-(43-47)Al-5Nb-0.2B-0.2C

Texto completo
Autor(es):
Soyama, Juliano [1] ; Limberg, Wolfgang [2] ; Ebel, Thomas [2] ; Pyczak, Florian [2]
Número total de Autores: 4
Afiliação do(s) autor(es):
[1] Univ Estadual Campinas, Fac Engn Mecan, Rua Mendeleyev 200, BR-13083860 Campinas - Brazil
[2] Helmholtz Zentrum Geesthacht, Inst Mat Res, Max Planck Str 1, D-21502 Geesthacht - Germany
Número total de Afiliações: 2
Tipo de documento: Artigo Científico
Fonte: ADVANCED ENGINEERING MATERIALS; JUN 2020.
Citações Web of Science: 0
Resumo

The effect of Al variations in the sintering behavior and creep resistance is investigated in powder-metallurgy-processed titanium aluminides based on the alloy TNB-V5 (Ti-45Al-5Nb-0.2B-0.2C at%). Two compositions are prepared with Al-contents of 43 and 47 at%, varying Al-content by +/- 2 at% relative to the reference material TNB-V5. Specimen preparation is conducted by metal injection molding using feedstock prepared with mixtures of prealloyed and elemental powders. The sinterability of alloys with addition of elemental powders decreases in comparison to the reference material, according to dilatometry experiments. However, in experiments with the sintering furnace, it is possible to obtain porosity with values of approximate to 10% by sintering at 1450 degrees C, whereas sintering at 1500 degrees C decreases the porosity to less than 1% in case of 43 at% and 45 at% of Al. Even though the alloy containing 47 at% Al shows higher porosity of about 7%, the creep resistance is superior to 43 at% Al, which can be attributed to a larger colony size. In tensile tests at room temperature, the effect of porosity is very detrimental leading to significantly reduced tensile strength and total elongation. Nevertheless, in compressive creep tests, the effect of porosity is secondary to colony size. (AU)

Processo FAPESP: 18/04564-0 - Aluminetos de titânio processados via metalurgia do pó
Beneficiário:Juliano Soyama
Linha de fomento: Auxílio à Pesquisa - Regular