Investigating a new approach for magnetic ionic liquids: Dispersive liquid-liquid microextraction coupled to pyrolysis gas-chromatography-mass spectrometry to determine flame retardants in sewage sludge samples

Autor(es)

Rodrigues, Thais ; Ferreira, Karen Chibana ; Isquibola, Guilherme ; Franco, Douglas Faza ; Anderson, Jared L. ; Merib, Josias de Oliveira ; Gomes, Paulo Clairmont Feitosa de Lima

• Tipo de documento: Artigo Científico
• Fonte: Journal of Chromatography A; v. 1730, p. 9-pg., 2024-06-20.

Resumo

This study addresses the analysis of emerging contaminants, often using chromatographic techniques coupled to mass spectrometry. However, sample preparation is often required prior to instrumental analysis, and dispersive liquid-liquid microextraction (DLLME) is a viable strategy in this context. DLLME stands out for its ability to reduce sample and solvent volumes. Notably, dispersive liquid-liquid microextraction using magnetic ionic liquids (MILs) has gained relevance due to the incorporation of paramagnetic components in the chemical structure, thereby eliminating the centrifugation step. A pyrolizer was selected in this work to introduce sample onto the GC column, since the MIL is extremely viscous and incompatible with direct introduction through an autosampler. This study is the first to report the use of a DLLME/MIL technique for sample introduction through a pyrolizer in gas chromatography coupled to mass spectrometry (GC-MS). This approach enables the MIL to be compatible with gas chromatography systems, resulting in optimized analytical and instrument performance. The analysis of polybrominated diphenyl ether flame retardants (PBDEs) was focused on the PBDE congeners 28, 47, 99, 100, and 153 in sewage sludge samples. The [P 6,6,6,14 + ]2[MnCl4 2 [MnCl 4 2- ] MIL was thoroughly characterized using UV-Vis, Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy, as well as thermal analysis. In the chromatographic method, a pyrolyzer was used in the sample introduction step (Py-GC-MS), and critical injection settings were optimized using multivariate approaches. Optimized conditions were achieved with a temperature of 220 degrees C, a pyrolysis time of 0.60 min, and an injection volume of 9.00 mu L. DLLME optimization was performed through central compound planning (CCD), and optimized training conditions were achieved with 10.0 mg of MIL, 3.00 mu L of acetonitrile (ACN) as dispersive solvent, extraction time of 60 s, and volume of a sample of 8.50 mL. Precision was observed to range from 0.11 % to 12.5 %, with limits of detection (LOD) of 44.4 mu g L-1 for PBDE 28, 16.9 mu g L-1 for PBDE 47 and PBDE 99, 33.0 mu g L-1 for PBDE 100 and 375 mu g L-1 for PBDE 153. PBDE 28 was identified and analyzed in the sludge sample at a concentration of 800 mu g L-1.-1 . The use of MIL in dispersive liquid-liquid microextraction combined with pyrolysis gas chromatography-mass spectrometry enables identification and quantification of PBDEs in sewage sludge samples at concentrations down to the mu g L-1 level. (AU)

• Processo FAPESP: 23/04832-2 - Desenvolvimento de rotadores faraday baseados em vidros óxidos e vitrocerâmicas contendo nanocristais de perovskita para aplicações tecnológicas
• Beneficiário: Douglas Faza Franco
• Modalidade de apoio: Auxílio à Pesquisa - Regular
• Processo FAPESP: 14/50945-4 - INCT 2014: Instituto Nacional de Tecnologias Alternativas para Detecção, Avaliação Toxicológica e Remoção de Micropoluentes e Radioativos
• Beneficiário: Maria Valnice Boldrin
• Modalidade de apoio: Auxílio à Pesquisa - Temático
• Processo FAPESP: 22/02991-3 - Novas estratégias analíticas para determinação de compostos químicos emergentes em amostras ambientais, alimentos e de fluídos biológicos
• Beneficiário: Paulo Clairmont Feitosa de Lima Gomes
• Modalidade de apoio: Auxílio à Pesquisa - Projeto Inicial