CV Lattes
ResearcherID
ORCID
Google Scholar Citations
Universidade Estadual Paulista (UNESP). Campus de Guaratinguetá. Faculdade de Engenharia (FEG) (Institutional affiliation from the last research proposal) Birthplace: Brazil
Odila Cioffi is graduated in Chemical Engineering from the School of Engineering of Lorena EEL-USP (1992). Masters in Mechanical Engineering from Universidade Estadual Paulista Júlio de Mesquita Filho UNESP (1996), and Ph.D. in Mechanical Engineering from Universidade Estadual Paulista Júlio de Mesquita Filho and the University of Naples "Federico II" (2001). She is currently a full Professor at the São Paulo State University Júlio de Mesquita Filho on the Guaratinguetá campus and has been an assessor to the undergraduate dean studies. She has experience in #8203;#8203;Materials and Metallurgical Engineering, particularly in developing composites for aeronautical application and natural composites for secondary applications, in the lines: RTM processing, fatigue behavior, dynamic mechanical analysis, C-Scan ultrasound. In 2020 he was a visiting professor at the Composite Materials Center at the University of Delaware (CCM / UDEL), where he worked with micro-encapsulated self-repair material for composites. (Source: Lattes Curriculum)
| News published in Agência FAPESP Newsletter about the researcher |
| More itemsLess items |
| TITULO |
| Articles published in other media outlets ( ): |
| More itemsLess items |
| VEICULO: TITULO (DATA) |
| VEICULO: TITULO (DATA) |
RTM is a production process of composites by transfering resin in low viscosity and pressure to a closed molding containing the perform. It is adequate to produce complex geometry components of composites which require high quality of finishing and no measurement limitation. Technical aspect as: 1) the tool, the accessories as the breath and the injection gates which have important influe…
Hybrid composites application for aeronautics industry could be a feasible solution to carbon fiber high cost. However, mechanical properties of this new composite remain being fundamental for structural application. One of the main factors that restricts laminated composites use in the aeronautical industry is the low value of interlaminar fracture toughness, which is represented mainly …
Composites are materials very attractive to the aeronautical industry due to higher mechanical strength for a light weight structure. Regarding hybrids composites, the possibility to combine different fibers advantages is a benefit considering the fact that a reduction of less desirable characteristics occurrs simultaneously. Epoxy resin as a matrix, a thermoset polymer, present mechanica…
This research work aims to produce and study the mechanical behavior of a structural composite constituted by a biaxial fabric reinforcement [-45+45] from the company SAERTEX of carbon fiber Hexcel IM7 GP in a quadriaxial architecture [0/90/+45/-45/-45/+45/90/0/0/90/+45/-45/-45/+45/90/0] in 8 layers, to ensure a volume of fibers higher than 50%, for a fabric grammature equal to 410 g/m2 a…
(Only some records are available in English at this moment)
It is well known that epoxy resin reinforced with carbon fibers, is used in the aeronautical industries due to its light weight, however has high tendency to nucleate microcracks, which, under applied loading, progress to delamination and possible structural failure. The traditional procedure to minimize the possibility of fracture is during maintenance schedule when inspecting to remove …
Although a great deal of research on the use of natural fibers for polymer composite production has been done over the las few years, there is still missing information on their overall mechanical behavior. This is especially true for their stability and long-term performances. In this project, it is proposed to study one aspect of materials performance via fatigue testing. The work is ma…
This research project aims to study the compaction behavior and the mechanisms of voids on aerospace-grade carbon fiber epoxy prepregs during its process of manufacture by vacuum and autoclave, evaluating, at first, its initial condition through observation of voids contents and relating them to process conditions as cycles of vacuum, pressure, temperature and time in order to minimize th…
(Only some records are available in English at this moment)
| 3 / 3 | Completed research grants |
| 22 / 18 | Completed scholarships in Brazil |
| 5 / 5 | Completed scholarships abroad |
| 30 / 26 | All research grants and scholarships |
| Associated processes | |