Bubble annular photoeletrocatalytic reactor with TiO2 nanotubes arrays applied in the textile wastewater

Autor(es)

Cardoso, Juliano Carvalho ; Lucchiari, Natlia ; Boldrin Zanoni, Maria Valnice

• Tipo de documento: Artigo Científico
• Fonte: JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING; v. 3, n. 2, p. 8-pg., 2015-06-01.

Resumo

This study proposed a simple and effective annular bubble photoreactor using an array of TiO2 nanotubes (NTs) prepared in situ by an anodisation process and used as photoanodes. The method is based on photoelectrocatalytic oxidation of the industrial textile wastewater (pH 7.83; conductivity 9.96 mS cm(-1); total dissolved solids 4.97 ppt; turbidity 0.04 NTU; colour 1146 mg/Pt; total organic carbon 5680 ppm and inorganic carbon 408.1 ppm) operating as follows: original pH of the effluent corrected to 2; current density of 9 mA cm(-2), commercial Hg high press lamp (250 W) irradiating at UV and visible region, and air bubble stirring of 700 mL min(-1). Using these optimised conditions, it was possible to obtain 90% colour removal (initial = 1.146 mg Pt), 66% COD reduction (initial = 5680 ppm) and 70% TOC removal after 3 h of treatment, reaching acceptable physicochemical properties for discharge. (C) 2015 Elsevier Ltd. All rights reserved. (AU)

• Processo FAPESP: 08/10449-7 - Avaliação da ocorrência, toxicidade/genotoxicidade e processos para degradação de corantes em efluentes e águas superficiais
• Beneficiário: Maria Valnice Boldrin
• Modalidade de apoio: Auxílio à Pesquisa - Temático
• Processo FAPESP: 11/23128-7 - DESENVOLVIMENTO DE REATOR FOTOELETROQUÍMICO EM ESCALA PILOTO UTILLIZANDO NANOTUBOS DE TiO2 PARA O TRATAMENTO DE RESÍDUOS DO SETOR TÊXTIL
• Beneficiário: Juliano Carvalho Cardoso
• Modalidade de apoio: Bolsas no Brasil - Pós-Doutorado