Busca avançada
Ano de início
Entree


Characterization and Simulation of a New Design Parallel-Plate Ionization Chamber for CT Dosimetry at Calibration Laboratories

Texto completo
Autor(es):
Perini, Ana P. ; Neves, Lucio P. ; Maia, Ana F. ; Caldas, Linda V. E.
Número total de Autores: 4
Tipo de documento: Artigo Científico
Fonte: IEEE Transactions on Nuclear Science; v. 60, n. 6, p. 9-pg., 2013-12-01.
Resumo

In this work, a new extended-length parallel-plate ionization chamber was tested in the standard radiation qualities for computed tomography established according to the half-value layers defined at the IEC 61267 standard, at the Calibration Laboratory of the Instituto de Pesquisas Energeticas e Nucleares (IPEN). The experimental characterization was made following the IEC 61674 standard recommendations. The experimental results obtained with the ionization chamber studied in this work were compared to those obtained with a commercial pencil ionization chamber, showing a good agreement. With the use of the PENELOPE Monte Carlo code, simulations were undertaken to evaluate the influence of the cables, insulator, PMMA body, collecting electrode, guard ring, screws, as well as different materials and geometrical arrangements, on the energy deposited on the ionization chamber sensitive volume. The maximum influence observed was 13.3% for the collecting electrode, and regarding the use of different materials and design, the substitutions showed that the original project presented the most suitable configuration. The experimental and simulated results obtained in this work show that this ionization chamber has appropriate characteristics to be used at calibration laboratories, for dosimetry in standard computed tomography and diagnostic radiology quality beams. (AU)

Processo FAPESP: 10/01070-4 - Desenvolvimento de uma câmara de ionização cavitária com qualidade metrológica para atuação como sistema padrão para radiação gama.
Beneficiário:Lucio Pereira Neves
Modalidade de apoio: Bolsas no Brasil - Doutorado