Busca avançada
Ano de início
Entree


Solution and Ageing Heat Treatments of ZK60 Magnesium Alloys with Rare Earth Additions Produced by Semi-Solid Casting

Texto completo
Autor(es):
da Silva, Erenilton Pereira ; Batista, Larissa Fernandes ; Callegari, Bruna ; Buzolin, Ricardo Henrique ; Warchomicka, Fernando ; Requena, Guillermo Carlos ; Brito, Pedro Paiva ; Pinto, Haroldo Cavalcanti
Número total de Autores: 8
Tipo de documento: Artigo Científico
Fonte: MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS; v. 17, n. 6, p. 6-pg., 2014-11-01.
Resumo

Rare earth elements reportedly improve high temperature strength and creep resistance of Mg alloys. In the present work, ZK60 Mg alloys containing different amounts (0.5, 1.5 and 2.5 wt.%) of rare earth additions were prepared by thixocasting and submitted to solution and ageing heat treatments (T4, T5 and T6). The as-cast and heat treated microstructures were investigated by scanning electron microscopy and hardness was evaluated as a function of heat treatment parameters. In the as-cast state, the alloys are formed by globular a-Mg grains reinforced by a network of composite Mg-Zn-RE precipitates with either smooth or lamellar/acicular morphologies. Solution of the smooth precipitates took place in alloys containing 0.5 and 1.5wt.% RE for T4-500 degrees C but no precipitates were dissolved with T4-380 degrees C. The optimum temperature for T5 and T6 was identified as 175 degrees C, while T6-500 degrees C led to the highest hardness, followed by T5 and T6-380 degrees C, respectively. (AU)

Processo FAPESP: 11/09324-8 - Junção por fricção e mistura mecânica em ligas tixofundidas de magnésio de alto desempenho
Beneficiário:Erenilton Pereira da Silva
Modalidade de apoio: Bolsas no Brasil - Doutorado Direto
Processo FAPESP: 11/19218-0 - Fundição, tratamento térmico e caracterização de ligas de magnésio ZK60-RE para aplicações em estruturas aeronáuticas
Beneficiário:Ivan Feierabend
Modalidade de apoio: Bolsas no Brasil - Iniciação Científica
Processo FAPESP: 10/11391-2 - Junção por fricção e mistura mecânica em ligas tixofundidas de magnésio de alto desempenho
Beneficiário:Haroldo Cavalcanti Pinto
Modalidade de apoio: Auxílio à Pesquisa - Jovens Pesquisadores
Processo FAPESP: 13/10937-0 - Soldagem por fricção e mistura mecânica de ligas de magnésio ZK60-RE para aplicações em estruturas aeronáuticas
Beneficiário:Bruna Callegari
Modalidade de apoio: Bolsas no Brasil - Iniciação Científica