An electrochemical analyzer for in situ flow determination of Pb(II) and Cd(II) in lake water with on-line data transmission and a global positioning system

Autor(es)

dos Santos, Vagner Bezerra ^[1] ; Fava, Elson Luiz ^[1] ; de Miranda Curi, Newton Sa ^[2] ; Faria, Ronaldo Censi ^[1] ; Guerreiro, Thiago Brito ^[1] ; Fatibello-Filho, Orlando ^[1]

Afiliação do(s) autor(es)

^[1] Univ Fed Sao Carlos, Ctr Ciencias Exatas & Tecnol, Dept Quim, BR-13565905 Sao Carlos, SP - Brazil

^[2] Fac Ind & Comerciosao Carlos, Sao Carlos, SP - Brazil

• Tipo de documento: Artigo Científico
• Fonte: ANALYTICAL METHODS; v. 7, n. 7, p. 3105-3112, 2015.
• Citações Web of Science: 7

Resumo

An electrochemical analyzer based on a potentiostat/galvanostat (PG004) was developed and applied to perform in situ Pb2+ and Cd2+ determination in water samples with on-line data transmission, and a global positioning system (GPS), to acquire the geographical coordinate of the place being monitored. For this, a flow-batch analysis (FBA) and a ther mostated electrochemical flow cell (EFC) coupled with a boron-doped diamond electrode (BDD) were developed to measure these ions by employing square-wave anodic stripping voltammetry (SWASV). To study the Pb2+ and Cd2+ ions by in situ analysis, mainly for temperature variation, the PG004 was evaluated and the limits of detection were 0.08 mu g L-1 and 0.18 mu g L-1, respectively, for simultaneous analysis. Then, the PG004 was used for in situ determination of analytes in lake water samples, and voltammograms with good resolution and low noise were obtained. Recoveries ranged from 93.3% to 109%, and the waste generated was as low as 700 mu L per determination. The accuracy of the method was checked by determination of Cd2+ and Pb2+ in certified water (NIST), t-unpaired test was applied for n = 3, and the values found were in close agreement at a confidence level of 95%. Besides the geographical coordinates obtained by using a GPS receiver, and experimental data sent via wireless, the device used a solar board as renewable energy. The developed system proved to be a useful tool to measure Pb2+ and Cd2+ in lake samples with a fast, on-line, and environmentally friendly analytical method. (AU)

• Processo FAPESP: 10/11690-0 - Desenvolvimento e aplicação de um potenciostato /galvanostato microprocessado portátil para o monitoramento in situ e on-line de íons metálicos em amostras ambientais
• Beneficiário: Orlando Fatibello Filho
• Modalidade de apoio: Auxílio à Pesquisa - Regular
• Processo FAPESP: 13/14993-1 - Caracterização e quantificação de monoalquil carbonatos em meio aquoso empregando dispositivos microfluídicos acoplado a um espectrômetro de massas
• Beneficiário: Vagner Bezerra dos Santos
• Modalidade de apoio: Bolsas no Brasil - Pós-Doutorado