| Texto completo | |
| Autor(es): |
Breno Padovezi Rocha
[1]
;
Jhaber Dahsan Yacoub
[2]
;
Jeferson Brito Fernandes
[3]
;
Roger Augusto Rodrigues
[4]
;
Heraldo Luiz Giacheti
[5]
Número total de Autores: 5
|
| Afiliação do(s) autor(es): | [1] Instituto Federal de Educação, Ciência e Tecnologia de São Paulo - Brasil
[2] Universidade Estadual Paulista “Júlio de Mesquita Filho”. Faculdade de Engenharia. Departamento de Engenharia Civil e Ambiental - Brasil
[3] Universidade Estadual Paulista “Júlio de Mesquita Filho”. Faculdade de Engenharia. Departamento de Engenharia Civil e Ambiental - Brasil
[4] Universidade Estadual Paulista “Júlio de Mesquita Filho”. Faculdade de Engenharia. Departamento de Engenharia Civil e Ambiental - Brasil
[5] Universidade Estadual Paulista “Júlio de Mesquita Filho”. Faculdade de Engenharia. Departamento de Engenharia Civil e Ambiental - Brasil
Número total de Afiliações: 5
|
| Tipo de documento: | Artigo Científico |
| Fonte: | Soils and Rocks; v. 46, n. 4 2023-12-08. |
| Resumo | |
Abstract The slope stability is an important topic because it presents risks of socio-economic losses caused by eventual ruptures. It is necessary to identify the site profile, as well as obtaining soil strength parameters for the slope stability analysis. This paper presents and discusses the use of the Flat Dilatometer Test (DMT) in the geotechnical site characterization for slope stability analysis in an unsaturated tropical soil site. Six DMTs were performed to define the stratigraphical profile and estimate geotechnical parameters. Shear strength parameters were determined in the laboratory using saturated and unsaturated triaxial compression as well as soil water retention curves (SWRC) to support DMT data interpretation. A commercial software was used to perform the slope stability analysis a cut slope with 6.6 m height and a gradient around 55° to illustrate the application of DMT and triaxial test data. The DMT allowed the representative site profile to be identified, as well as estimating the design parameters that compared well to those interpreted from unsaturated triaxial test data for the in-situ soil suction. The DMT can be used as logging test in the preliminary characterization of studied site specially to define the stratigraphical profile, site variability, select the regions to collect disturbed and undisturbed soil samples and as the first attempt to estimate the geotechnical design parameters via correlations. It is important to emphasize that laboratory tests on undisturbed soil samples are essential in the slope stability analysis of unsaturated tropical soil profiles. (AU) | |
| Processo FAPESP: | 17/23174-5 - Estudo da Resistência e da Deformabilidade de um Perfil de Solo Tropical Não Saturado |
| Beneficiário: | Heraldo Luiz Giacheti |
| Modalidade de apoio: | Auxílio à Pesquisa - Regular |
| Processo FAPESP: | 15/17260-0 - Ensaio de dilatômetro sísmico para a investigação de solos tropicais |
| Beneficiário: | Heraldo Luiz Giacheti |
| Modalidade de apoio: | Auxílio à Pesquisa - Regular |