Busca avançada
Ano de início
Entree


Direct laser writing of MnOx x decorated laser-induced graphene on paper for sustainable microsupercapacitor fabrication

Texto completo
Autor(es):
Abreu, Rodrigo ; Klem, Maykel dos Santos ; Pinheiro, Tomas ; Pinto, Joana Vaz ; Alves, Neri ; Martins, Rodrigo ; Carlos, Emanuel ; Coelho, Joao
Número total de Autores: 8
Tipo de documento: Artigo Científico
Fonte: FLATCHEM; v. 46, p. 9-pg., 2024-05-17.
Resumo

Laser-induced graphene (LIG) on paper is a popular choice for fabricating flexible micro-supercapacitors (MSCs) as it is a simple and sustainable process. However, carbon-based MSC electrodes have limited energy densities. To address this challenge, this study presents a highly reproducible and cost-effective method for decorating manganese oxide (MnOx) x ) on interdigital LIG MSC electrodes, fabricated via a single-step direct laser writing (DLW) process on paper substrates. The paper fibers embedded with MnOx x precursors are transformed into graphene through laser processing while reducing the salt, resulting in the formation of MnOx-LIG. x-LIG. The resulting MnOx-LIG-MSC x-LIG-MSC exhibits a specific capacitance of 12.30 mF cm- 2 (0.05 mA cm- 2 ) with a 60 % retention at 1000 bending cycles (30 degrees), degrees ), due to the pseudocapacitive contribution of MnOx. x . Furthermore, the devices exhibit high electrochemical stability, retaining 190 % of the initial specific capacitance after 10,000 cycles, and a high energy density of 2.6 mu Wh cm-- 2 (at a power of 0.109 mW cm-- 2 ). The study demonstrates that manganese oxide- based LIG-MSCs have the potential to be used as energy storage devices for portable, low-cost, and flexible paper electronics. (AU)

Processo FAPESP: 18/02604-4 - Estudo de supercapacitores impressos integrando transistores com eletrólito no gate
Beneficiário:Maykel dos Santos Klem
Modalidade de apoio: Bolsas no Brasil - Doutorado
Processo FAPESP: 22/12332-7 - Dispositivos eletrônicos impressos para uma eletrônica sustentável
Beneficiário:Neri Alves
Modalidade de apoio: Auxílio à Pesquisa - Regular
Processo FAPESP: 21/14141-1 - Estudo de eletrodos à base de grafeno induzido por laser para aplicação em dispositivos biodegradáveis
Beneficiário:Maykel dos Santos Klem
Modalidade de apoio: Bolsas no Exterior - Estágio de Pesquisa - Doutorado