Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

HDR Ir-192 source speed measurements using a high speed video camera

Texto completo
Autor(es):
Fonseca, Gabriel P. [1, 2] ; Viana, Rodrigo S. S. [1] ; Podesta, Mark [2] ; Rubo, Rodrigo A. [3] ; de Sales, Camila P. [3] ; Reniers, Brigitte [2, 4] ; Yoriyaz, Helio [1] ; Verhaegen, Frank [5, 2]
Número total de Autores: 8
Afiliação do(s) autor(es):
[1] CNEN SP, IPEN, BR-05508000 Sao Paulo - Brazil
[2] Maastricht Univ, Med Ctr, GROW Sch Oncol & Dev Biol, Dept Radiat Oncol MAASTRO, NL-6201 BN Maastricht - Netherlands
[3] Univ Sao Paulo HC FMUSP, Hosp Clin, BR-05508000 Sao Paulo - Brazil
[4] Hasselt Univ, CMK, Res Grp NuTeC, B-3590 Diepenbeek - Belgium
[5] McGill Univ, Dept Oncol, Med Phys Unit, Montreal, PQ H3G 1A4 - Canada
Número total de Afiliações: 5
Tipo de documento: Artigo Científico
Fonte: Medical Physics; v. 42, n. 1, p. 412-415, JAN 2015.
Citações Web of Science: 7
Resumo

Purpose: The dose delivered with a HDR Ir-192 afterloader can be separated into a dwell component, and a transit component resulting from the source movement. The transit component is directly dependent on the source speed profile and it is the goal of this study to measure accurate source speed profiles. Methods: A high speed video camera was used to record the movement of a Ir-192 source (Nucletron, an Elekta company, Stockholm, Sweden) for interdwell distances of 0.25-5 cm with dwell times of 0.1, 1, and 2 s. Transit dose distributions were calculated using a Monte Carlo code simulating the source movement. Results: The source stops at each dwell position oscillating around the desired position for a duration up to (0.026 +/- 0.005) s. The source speed profile shows variations between 0 and 81 cm/s with average speed of similar to 33 cm/s for most of the interdwell distances. The source stops for up to (0.005 +/- 0.001) s at nonprogrammed positions in between two programmed dwell positions. The dwell time correction applied by the manufacturer compensates the transit dose between the dwell positions leading to a maximum overdose of 41 mGy for the considered cases and assuming an air-kerma strength of 48 000 U. The transit dose component is not uniformly distributed leading to over and underdoses, which is within 1.4% for commonly prescribed doses (3-10 Gy). Conclusions: The source maintains its speed even for the short interdwell distances. Dose variations due to the transit dose component are much lower than the prescribed treatment doses for brachytherapy, although transit dose component should be evaluated individually for clinical cases. (c) 2015 American Association of Physicists in Medicine. (AU)

Processo FAPESP: 11/22778-8 - Dosimetria 3D baseada em imagens médicas e códigos de Monte Carlo com aplicação em braquiterapia
Beneficiário:Hélio Yoriyaz
Modalidade de apoio: Auxílio à Pesquisa - Regular
Processo FAPESP: 11/01913-4 - Modelagem pelo método de Monte Carlo do paciente e das complexidades dos tratamentos braquiterápicos com alta taxa de dose
Beneficiário:Gabriel Paiva Fonseca
Modalidade de apoio: Bolsas no Brasil - Doutorado