Porous Polymeric Templates on ITO Prepared by Breath Figure Method for Gold Electrodeposition

Autor(es)

Colombo, Rafael N. P. ^[1] ; Petri, Denise F. S. ^[1] ; Cordoba de Torresi, Susana I. ^[1] ; Goncales, Vinicius R. ^[1]

Afiliação do(s) autor(es)

^[1] Univ Sao Paulo, Inst Quim, BR-05513970 Sao Paulo, SP - Brazil

• Tipo de documento: Artigo Científico
• Fonte: Electrochimica Acta; v. 158, p. 187-195, MAR 10 2015.
• Citações Web of Science: 3

Resumo

The formation of porous spin-coated poly(methyl methacrylate) (PMMA) films on indium tin oxide (ITO) by breath figure method (BFM) is simple, fast and low cost. The porous PMMA film was applied as template for gold electrodeposition, allowing the control of the (i) amount of electrodeposited material by monitoring the charge densities and (ii) morphology of the resulting structure by properly setting the deposition kinetics. The precise control of the deposition conditions was crucial in order to avoid the loss of the desired patterned structure. This issue was investigated by varying the charge densities from 1.0 x 10(-2) to 4.0 x 10(-2)Ccm(-2). Moreover, the variation in the cathodic current densities from 4.0 x 10(-5) to 4.0 x 10(-3)Acm(-2) directly affected the roughness of the obtained gold particles. Finally, the method employed for the removal of porous PMMA affects the gold structure: the dissolution of PMMA in dimethylformamide (DMF) led to the formation of gold particles with (270 +/- 50) nm in diameter, while the calcination of the polymeric membranes generated gold rings with (400 +/- 100) nm in diameter. Such gold structures are relevant for applications in spectroscopy, (bio) sensors, catalysis and photonics. (C) 2015 Elsevier Ltd. All rights reserved. (AU)

• Processo FAPESP: 09/53199-3 - Reconhecimento molecular e armazenamento de energia: estudos fundamentais do efeito de geometria, tamanho e síntese na otimização das propriedades químicas de materiais eletroativos
• Beneficiário: Roberto Manuel Torresi
• Modalidade de apoio: Auxílio à Pesquisa - Temático
• Processo FAPESP: 12/22755-0 - Otimização de biossensores baseados na interação entre óxido de grafeno reduzido e biomoléculas
• Beneficiário: Rafael Neri Prystaj Colombo
• Modalidade de apoio: Bolsas no Brasil - Iniciação Científica
• Processo FAPESP: 11/15159-0 - Biossensores de terceira geração baseados na interação entre óxido de grafeno reduzido, líquidos iônicos e enzimas oxidases.
• Beneficiário: Vinicius Romero Gonçales
• Modalidade de apoio: Bolsas no Brasil - Pós-Doutorado