| Texto completo | |
| Autor(es): |
Theodoro, Guilherme Teixeira
;
Fiorin, Livia
;
Mauricio Moris, Izabela Cristina
;
Silveira Rodrigues, Renata Cristina
;
Ribeiro, Ricardo Faria
;
Lapria Faria, Adriana Claudia
Número total de Autores: 6
|
| Tipo de documento: | Artigo Científico |
| Fonte: | JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS; v. 65, p. 609-615, JAN 2017. |
| Citações Web of Science: | 1 |
| Resumo | |
Dental ceramics have been widely used because of aesthetic, but wear is still questioned. There are relates that ceramic surface is prone to degradation by acidulated fluoride, that can increase wear rates. The aim of this study was to evaluate the effect of neutral and acidulated fluoride gel, used as preventive agents for professional use, at wear and compression strength of dental ceramics IPS e.max ZirPress (ZIR), IPS Empress Esthetic (EMP) e IPS Inline POM (POM). For this, 30 crowns and 30 disks were obtained by heat-pressing. Crowns and disks were submitted to two-body wear test at machine of mechanical loading, simulating occlusion, lateral movement and disocclusion. It was performed 300,000 cycles at 1 Hz frequency under 20 N load, to simulate 1 year of mastication. Samples were totally immersed during the test and were divided into three groups according to the gel used for immersion (n=10): control, neutral (sodium fluoride 2%) and acidulated (acidulated phosphate fluoride 1.23%). Samples (crowns and disks) were analyzed for vertical height loss after the test using, respectively, profile projector and stereomicroscope. Roughness of worn surface of crowns and disks was evaluated by laser confocal microscopy. Data of height loss and roughness were evaluated by two-way ANOVA and Bonferroni's test. A crown/disk of each group was analyzed by scanning electronic microscopy. After wear resistance tests, crowns were cemented to their abutments and submitted to compressive load at 30 angulation and 1 mm/min speed. Type of failures was compared by qui-square test. Ceramic EMP worn less while ZIR worn more. Control gel worn more at crowns while acidulated gel worn more at disks. Surface roughness of samples tested at acidulated gel was significantly lower. Type of failures found at compression resistance tests was affected by ceramic type, but not by gel used. The results suggest that ceramic and fluoride gel affect wear and roughness of worn surface while type of failure is only affected by ceramic. (AU) | |
| Processo FAPESP: | 14/08212-0 - Resistência ao desgaste de coroas de cerâmica prensadas sobre copings de zircônia em diferentes meios fluoretados |
| Beneficiário: | Guilherme Teixeira Theodoro |
| Modalidade de apoio: | Bolsas no Brasil - Iniciação Científica |
| Processo FAPESP: | 13/11926-1 - Efeito do fluoreto na resistência ao desgaste de cerâmicas odontológicas |
| Beneficiário: | Adriana Cláudia Lapria Faria |
| Modalidade de apoio: | Auxílio à Pesquisa - Regular |