Effect of segregation on particle size stability and SPS sintering of Li2O-Doped magnesium aluminate spinel

Autor(es)

Caliman, L. B. ^[1] ; Muche, D. ^[2] ; Silva, A. ^[1] ; Ospina, C. A. R. ^[3] ; Machado, I. F. ^[4] ; Castro, R. H. R. ^[2] ; Gouvea, D. ^[1]

Afiliação do(s) autor(es)

^[1] Univ Sao Paulo, Polytech Sch, Dept Met & Mat Engn, Av Prof Mello Moraes 2463, BR-05508030 Sao Paulo, SP - Brazil

^[2] Univ Calif Davis, Dept Mat Sci & Engn, Davis, CA 95616 - USA

^[3] Brazilian Ctr Res Energy & Mat CNPEM, Brazilian Nanotechnol Natl Lab LNNano, BR-13083970 Campinas, SP - Brazil

^[4] Univ Sao Paulo, Polytech Sch, Dept Mechatron Engn & Mech Syst, Av Prof Mello Moraes 2231, BR-05508030 Sao Paulo, SP - Brazil

• Tipo de documento: Artigo Científico
• Fonte: Journal of the European Ceramic Society; v. 39, n. 10, p. 3213-3220, AUG 2019.
• Citações Web of Science: 1

Resumo

Magnesium aluminate spinel (MAS) was prepared using the simultaneous precipitation method by varying the concentration of Li2O from 0 to 5 mol%. No residual chlorine from the LiCl precursor was detected in the final powders while Li achieved the target concentration in all samples and contributed to stabilizing nanoparticles smaller than 10 nm. Li segregation to both interfaces (surfaces and grain boundaries) occurred and tended to be more pronounced at the grain boundaries stabilizing this type of interface during processing rather than surfaces. Spark plasma sintering (SPS) was used to consolidate the nanopowders into fully dense nanostructured pellets. The increase in Li content facilitated the sintering process and pore elimination occurred at 850-900 degrees C, a much lower temperature range as compared to conventional sintering (1650 degrees C). Samples containing 5 mol% Li sintered at 850 degrees C exhibited a medium grain size of (similar to)25 nm, microhardness of (similar to)24 GPa and (similar to)50% in-line optical transmission at the 800 nm. (AU)

• Processo FAPESP: 13/23209-2 - Segregação de íons na superfície de nano-óxidos e sua influência no processo coloidal
• Beneficiário: Douglas Gouvêa
• Modalidade de apoio: Auxílio à Pesquisa - Regular
• Processo FAPESP: 15/50443-1 - Interfaces in ceramic processing
• Beneficiário: Douglas Gouvêa
• Modalidade de apoio: Auxílio à Pesquisa - Regular