| Texto completo | |
| Autor(es): |
Oliveira Souza, Ariane Gaspari
[1]
;
Aliprandini, Paula
[1]
;
Romano Espinosa, Denise Crocce
[1]
;
Soares Tenorio, Jorge Alberto
[1]
Número total de Autores: 4
|
| Afiliação do(s) autor(es): | [1] Univ Sao Paulo, Chem Engn, Rua Lago 250, BR-05508080 Sao Paulo, SP - Brazil
Número total de Afiliações: 1
|
| Tipo de documento: | Artigo Científico |
| Fonte: | JOM; v. 71, n. 6, p. 2003-2009, JUN 2019. |
| Citações Web of Science: | 1 |
| Resumo | |
Extraction of scandium (Sc) from nickel processing residue using Cyanex 923 was studied. Cyanex 923 showed better selectivity for Sc compared with the other metallic components in the residue. Scandium was extracted by solvent extraction via a solvation mechanism. The aqueous-to-organic (A/O) phase ratio was set at 1:2. An increase in the scandium extraction rate was observed when increasing the concentration of H+. Cyanex 923 was shown to be more selective for Sc than Fe. Coextracted Fe was removed from the organic phase by 3 mol L-1 H2SO4 scrubbing with Sc loss of 1.3%. Stripping of scandium from the organic phase of 84.3% was achieved using 4% oxalic acid solution. The precipitated scandium oxalate was recovered by filtration and calcination. The obtained scandium oxide presented minimum purity of 99.0%. (AU) | |
| Processo FAPESP: | 12/51871-9 - Estudo de novas tecnologias e rotas de processamento para o tratamento e reciclagem de resíduos sólidos |
| Beneficiário: | Jorge Alberto Soares Tenório |
| Modalidade de apoio: | Auxílio à Pesquisa - Temático |