Autor(es)

de Oliveira, D. C. R. S. ^[1] ; Rocha, M. G. ^[1] ; Correr, A. B. ^[1] ; Ferracane, J. L. ^[2] ; Sinhoreti, M. A. C. ^[1]

Afiliação do(s) autor(es)

^[1] Univ Estadual Campinas, Piracicaba Dent Sch, Dept Restorat Dent, Piracicaba, SP - Brazil

^[2] Oregon Hlth & Sci Univ, Dept Restorat Dent Sch Dent, Portland, OR 97201 - USA

• Tipo de documento: Artigo Científico
• Fonte: Operative Dentistry; v. 44, n. 4, p. 365-378, JUL-AUG 2019.
• Citações Web of Science: 0

Resumo

Light activation is an important clinical step for achieving success in restorative procedures. This study evaluated the influence of beam profile from different light emission tip types of multiwave light-emitting diodes (LEDs) on the curing profile of resin-based composites. Experimental composites were produced containing either camphorquinone (CQ) or diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO) as a photoinitiator. Multiwave LEDs with either a bundle light guide tip (Bluephase G2, Ivoclar Vivadent) or a microlens tip (VALO Cordless, Ultradent) were characterized using a beam profiler. Block-shaped samples (5X5X3 mm depth) of the two composites were cured in a custom-designed mold with the multiwave LEDs positioned to compare the regions exposed to the 420-495 nm (blue) and 380-420 nm (violet) emittances. To map the curing profile, the degree of conversion (DC) of longitudinal thin cross sections from each block was evaluated using transmission FT-NIR. Radiant exposure transmitted through the composites during curing was evaluated at different thicknesses. Data were analyzed using analysis of variance and Tukey test (alpha=0.05; `'beta=0.2). The results indicated that there were differences in the beam profile and the overall radiant exposures transmitted through the composites using each multiwave LED (p<0.01, df=1 F=73.18). However, there were no differences in the curing profiles provided by the two multiwave LEDs (p=0.89, df=12 F=0.52), and similar effects were found according to the different LED emittance regions (p =0.09, df=5, F=2.11). When considering up to 1 mm in depth, no differences in the DC were found between the composites containing either photoinitiators. Starting at 2 mm in depth, the composite containing TPO showed a decrease in DC in the 420-495 nm emittance region, while the composite containing CQ showed a similar decrease in cure efficiency only at 3-mm depth under both 380-420 nm and 420-495 nm emittance regions. Thus, despite the fact that the nonuniform light beam emitted from the two multiwave LEDs was visually distinctly different when delivering 24 J/cm(2), this difference did not seem to affect the curing profile of the composites. However, light transmission within 380-420 nm seems to be reduced with depth, directly affecting the curing profile of composites containing a photoinitiator with absorbance falling within this emission range. (AU)

• Processo FAPESP: 17/22195-9 - Desenvolvimento e caracterização de compósitos bulk fill fotopolimerizados usando banda de resonância plasmônica de nanopartículas de prata como sistema fotoiniciador
• Beneficiário: Mateus Garcia Rocha
• Modalidade de apoio: Bolsas no Exterior - Estágio de Pesquisa - Doutorado
• Processo FAPESP: 16/06019-3 - Propriedades físico-químicas e resistência ao desgaste de compósitos odontológicos bulkfill comerciais e experimentais à base de monômero elastomérico
• Beneficiário: Mateus Garcia Rocha
• Modalidade de apoio: Bolsas no Brasil - Doutorado
• Processo FAPESP: 16/05823-3 - Fontes de luz de baixa intensidade e sistemas de fotoiniciação ativados por comprimentos de ondas entre 495-750nm para materiais resinosos odontológicos
• Beneficiário: Dayane Carvalho Ramos Salles de Oliveira
• Modalidade de apoio: Bolsas no Brasil - Pós-Doutorado
• Processo FAPESP: 14/03028-6 - Propriedades Ópticas e Cinética de Polimerização de Resinas Experimentais Contendo Sistemas Fotoiniciadores Alternativos fotoativadas por Diferentes Fontes de Luz.
• Beneficiário: Dayane Carvalho Ramos Salles de Oliveira
• Modalidade de apoio: Bolsas no Exterior - Estágio de Pesquisa - Doutorado
• Processo FAPESP: 17/22161-7 - Desenvolvimento e caracterização de materiais resinosos odontológicos ativados por comprimentos de ondas entre 495 e 750nm
• Beneficiário: Dayane Carvalho Ramos Salles de Oliveira
• Modalidade de apoio: Bolsas no Exterior - Estágio de Pesquisa - Pós-Doutorado
• Processo FAPESP: 13/04241-2 - Influência do Sistema Fotoiniciador e Agentes Redutores nas Propriedades Físicas de Resinas Experimentais Fotoativadas por LEDs.
• Beneficiário: Dayane Carvalho Ramos Salles de Oliveira
• Modalidade de apoio: Bolsas no Brasil - Doutorado