Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

Evaluation of mechanical properties of WC-Co and CrC coatings obtained from powder and flexible cored wire feedstock materials

Texto completo
Autor(es):
Sanchez Orozco, Mario [1] ; Reyes Mojena, Miguel Angel [1] ; Carvajal Fals, Hipolito Domingo [1] ; Camello Lima, Carlos Roberto [2]
Número total de Autores: 4
Afiliação do(s) autor(es):
[1] Oriente Univ, Coll Mech Engn, Avda Amer S-N, Santiago De Cuba 90900 - Cuba
[2] Univ Metodista Piracicaba, Prod Engn Grad Program, Rod Luis Ometto, Km 24, BR-13451900 Sao Paulo - Brazil
Número total de Afiliações: 2
Tipo de documento: Artigo Científico
Fonte: MATERIALS RESEARCH EXPRESS; v. 6, n. 9 SEP 2019.
Citações Web of Science: 0
Resumo

This paper assesses the microstructure, porosity, microhardness (Hv) and fracture toughness (K-C) of cemented carbides coatings deposited by High-Velocity Oxygen Fuel (HVOF) and Flame (FSFC) spray processes. Three types of coatings were applied for each process from similar feedstock materials in powder and cored wire form. Measurements of fracture toughness were conducted with the Vickers indentation method in the cross section of the deposited layers. An image processing system was applied for the analysis of porosity, showing a globular morphology of the pores in both processes. The experimental results allowed corroborating that the coatings applied by HVOF using powder feedstock have lower porosity than those achieved with the Flame Spray of cored wire material (FSFC). In HVOF and FSFC processes, the porosity of the coating could be an important factor, but when kept in low values, the decrease in Hv and K-C are mainly related to the microstructural changes in the coating. The results also allow considering the FSFC technique as a feasible alternative particularly in applications such as internal part of industrial pipes where it becomes difficult to use HVOF due to accessibility problems. (AU)

Processo FAPESP: 17/25363-0 - Influência da adesão de revestimentos aplicados por distintos processos de aspersão térmica sobre suas propriedades de desgaste e corrosão
Beneficiário:Carlos Roberto Camello Lima
Linha de fomento: Auxílio à Pesquisa - Pesquisador Visitante - Internacional