Effect of high pressure laminate residue on the mechanical properties of recycled polypropylene blends

Autor(es)

Prestes Pires, Pamela Galera ^[1] ; Domingos Maia, Amanda Alves ^[2] ; Faulstich de Paiva, Jane Maria ^{[2, 1]}

Afiliação do(s) autor(es)

^[1] Univ Fed Sao Carlos, Mat Sci Program, UFSCar Sorocaba Campus, Sao Carlos - Brazil

^[2] Univ Fed Sao Carlos, Dept Prod Engn, UFSCar Sorocaba Campus Rod Joao Leme Santos, BR-18052780 Sorocaba, SP - Brazil

• Tipo de documento: Artigo Científico
• Fonte: Polymer Testing; v. 80, DEC 2019.
• Citações Web of Science: 0

Resumo

Blends using raw materials from industrial waste were molded. As thermoplastic matrix was used recycled polypropylene (PP), a type of residue containing thermosetting powder from high-pressure laminate (HPL) was used as filler and epoxidized soybean oil (ESO) was also utilized. In order to evaluate the mechanical and thermal properties were performed tensile, flexural, Charpy impact tests, softening point temperature (Vicat), heat deflection temperature (HDT), dynamic-mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Characterization analyzes as density and scanning electron microscopy (SEM) were also performed. The filler HPL showed good dispersion in the recycled PP matrix and the density already increased from adding 10% of HPL. The tensile and flexural strengths decreased with the addition of the HPL which also caused increase in the heat deflection temperature and decrease the tenacity of the PP matrix. The values of tensile and flexural modulus increased with the addition of 40% HPL. The storage modulus obtained by DMTA improved with the addition of filler, especially the composite containing 40% HPL. The degree of crystallinity also increased with increasing amount of HPL. In general, the use of HPL as reinforcing filler in blends is feasible and can be used for example in the manufacture of supermarket box, pallets, chairs, internal coating of vehicles and among others. (AU)

• Processo FAPESP: 06/60885-2 - Moldagem de compósitos poliméricos reforçados com mantas de fibras vegetais e estudo de duas propriedades térmicas e dinâmico mecânicas
• Beneficiário: Jane Maria Faulstich de Paiva
• Modalidade de apoio: Auxílio à Pesquisa - Jovens Pesquisadores