Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do SciELO, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

Vibration Control Using Multilayer Piezoelectric Actuators: Towards Chatter Supression in Turning Operations

Texto completo
Autor(es):
Giuliana Sardi Venter [1] ; Maíra Martins da Silva [2]
Número total de Autores: 2
Afiliação do(s) autor(es):
[1] Universidade Federal do Paraná. Departamento de Engenharia Mecânica - Brasil
[2] Universidade de São Paulo. Escola de Engenharia de São Carlos. Departamento de Engenharia Mecânica - Brasil
Número total de Afiliações: 2
Tipo de documento: Artigo Científico
Fonte: MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS; v. 23, n. 4 2020-07-20.
Resumo

Abstract Chatter causes poor surface quality and damage to tools in machining. Therefore, strategies for chatter monitoring and reduction are constantly under investigation. Among these strategies, the use of piezoelectric layers embedded in the tool-holder as sensors/actuators for control strategies had been proposed for improving the stability limit reducing the system vibration. Nevertheless, actuators implemented using a single piezoelectric layer may fail to suppress chatter due to its limited actuation power. A method for assembling a series multilayer piezoelectric actuator is then proposed, which can provide a better performance and ultimately suppress chatter in turning operations. This actuator is used with passive and active control and the system response is investigated using frequency response functions. Two fixation conditions are tested to analyze the robustness of the control strategies. The results show that the use of a multilayer piezoelectric actuator made it possible for a greater reduction in vibration amplitude in the chatter frequency. (AU)

Processo FAPESP: 16/11309-0 - Estudo, desenvolvimento e aplicação de processo híbrido: Manufatura Aditiva (Ma) + High Speed Machining/Grinding (HSM/G)
Beneficiário:Reginaldo Teixeira Coelho
Modalidade de apoio: Auxílio à Pesquisa - Temático
Processo FAPESP: 14/23108-4 - Controle ativo para redução de chatter em processos de torneamento utilizando atuadores piezelétricos multicamadas
Beneficiário:Giuliana Sardi Venter
Modalidade de apoio: Bolsas no Brasil - Doutorado