Design of TiVNb-(Cr, Ni or Co) multicomponent alloys with the same valence electron concentration for hydrogen storage

Autor(es)

Silva, Bruno Hessel ^[1] ; Zlotea, Claudia ^[2] ; Champion, Yannick ^[3] ; Botta, Walter Jose ^{[1, 4]} ; Zepon, Guilherme ^{[1, 4]}

Afiliação do(s) autor(es)

^[1] Univ Fed Sao Carlos, Grad Program Mat Sci & Engn, Fed Univ Sao Carlos PPGCEM UFSCar, Rodovia Washington Luiz, Km 235, BR-13565905 Sao Carlos, SP - Brazil

^[2] Univ Paris Est Creteil, CNRS, ICMPE, UMR 7182, 2 Rue Henri Dunant, F-94320 Thiais - France

^[3] Univ Grenoble Alpes, CNRS, SIMaP, F-38000 Grenoble - France

^[4] Univ Fed Sao Carlos, Dept Mat Engn DEMa UFSCar, Rodovia Washington Luiz, Km 235, BR-13565905 Sao Carlos, SP - Brazil

• Tipo de documento: Artigo Científico
• Fonte: Journal of Alloys and Compounds; v. 865, JUN 5 2021.
• Citações Web of Science: 0

Resumo

Recently, it has been hypothesized that the hydrogen sorption properties of body-centered cubic (BCC) multicomponent alloys might be related to the alloy's valence electron concentration (VEC). In this work, we employed CALPHAD method to design three BCC alloys with the same VEC to evaluate this hypothesis. The (TiVNb)(85)Cr-15, (TiVNb)(95)Co-.(3)4(.7) and (TiVNb)(96)Ni-.(2)3(.8) multicomponent alloys with VEC = 4.87 were produced by arc melting. Although some amount of segregation could not be avoided, the as-cast microstructures were composed of a BCC phase with highly homogeneous chemical composition. The alloys quickly absorb hydrogen at room temperature and formed FCC hydrides with high capacities of 2 H/M (3.1-3.2 wt%). For the three alloys, it was observed a two-step hydrogenation sequence indicating the formation of an intermediate BCC monohydride prior to the formation of the FCC dihydride. Moreover, the three alloys presented very similar values of enthalpy and entropy of hydrogenation, showing that the initial hypothesis seems to hold for the thermodynamic properties. The alloys hydrogenation/dehydrogenation cycling behavior were also evaluated. (TiVNb)(85)Cr-15 had a small and continuous drop in capacity over cycling that was addressed to incomplete transformation of the BCC monohydride to the FCC dihydride, whereas (TiVNb)(95)Co-.3(4.7) and (TiVNb)(96)Ni-.2(3.8) showed a more stable behavior achieving a reversible capacity of 1.76 H/M (2.77 wt%) after 20 cycles. The desorption is strongly affected by absorption/desorption cycling for all alloys, as revealed by thermo desorption spectroscopy (TDS). The onset temperature of desorption depends on the alloys' composition as well as the number of hydrogenation/dehydrogenation cycles. The results suggest that cycling and desorption properties of the alloys are less related to their VEC. (C) 2021 Elsevier B.V. All rights reserved. (AU)

• Processo FAPESP: 20/07707-6 - Propriedades de armazenagem de hidrogênio de ligas multicomponentes do sistema TiVNbM (M = Cr, Co e Ni)
• Beneficiário: Bruno Hessel Silva
• Modalidade de apoio: Bolsas no Brasil - Doutorado