Influence of Prosthetic Screw Material on Joint Stability in Passive and Non-Passive Implant-Supported Dentures

Autor(es)

Spazzin, Aloisio Oro ; Pessanha Henriques, Guilherme Elias ; de Arruda Nobilo, Mauro Antonio ; Xediek Consani, Rafael Leonardo ; Correr-Sobrinho, Lourenco ; Mesquita, Marcelo Ferraz

• Tipo de documento: Artigo Científico
• Fonte: OPEN DENTISTRY JOURNAL; v. 3, p. 5-pg., 2009-01-01.

Resumo

Objectives: This study evaluated the influence of prosthetic screw material on joint stability in implant-supported dentures at two levels of fit. Methods: Ten mandibular implant-supported dentures were fabricated. Twenty cast models were fabricated using these dentures. Four groups (n=10) were tested, according to the vertical fit of the dentures [passive and non-passive] and prosthetic screw materials [titanium (Ti) or gold (Au) alloy]. The one-screw test was performed to quantify the vertical misfits using an optic microscope. The loosening torque for the prosthetic screws was measured 24 hours after the tightening torque (10 Ncm)using a digital torque meter. Data were analyzed by two-way ANOVA and Tukey's test (alpha=0.05). Results: Overall, dentures with passive fit and Ti screws resulted in significantly higher loosening torque of the prosthetic screws (p<0.05). No significant interaction was found between fit level and screw material (p=0.199). The prosthetic screw material and fit of implant-supported dentures have an influence on screw joint stability. Ti screws presented higher joint stability than Au screws and minimum of misfit should be found clinically to improve the mechanical behavior of the screw joint. (AU)

• Processo FAPESP: 07/55352-8 - Forca de destorque de parafusos proteticos: efeito do desajuste marginal, conferencia do torque e material do parafuso protetico.
• Beneficiário: Marcelo Ferraz Mesquita
• Modalidade de apoio: Auxílio à Pesquisa - Regular