Shrinkage stress and mechanical properties of photoactivated composite resin using the argon ion laser

Autor(es)

Delfino, C. S. ^[1] ; Pfeifer, C. S. C. ^[2] ; Braga, R. R. ^[2] ; Youssef, M. N. ^{[1, 3]} ; Turbino, M. L. ^[1]

Afiliação do(s) autor(es)

^[1] Univ Sao Paulo, Dept Restorat Dent, Sch Dent, BR-05508900 Sao Paulo - Brazil

^[2] Univ Sao Paulo, Dept Dent Mat, Sch Dent, BR-05508900 Sao Paulo - Brazil

^[3] Univ Cruzeiro Sul, Div Postgrad, Sch Dent, Sao Paulo - Brazil

• Tipo de documento: Artigo Científico
• Fonte: APPLIED PHYSICS B-LASERS AND OPTICS; v. 96, n. 1, p. 79-84, JUL 2009.
• Citações Web of Science: 5

Resumo

The objective of this study was to verify the influence of photoactivation with the argon ion laser on shrinkage stress (SS), followed by evaluation of Vickers microhardness (VM), percentage of maximum hardness (PMH), flexural strength (FS), and flexural modulus (FM) of a composite resin. The study groups were: L1-laser at 200 mW for 10 seconds; L2-laser at 200 mW for 20 seconds; L3-laser at 250 mW for 10 seconds; L4-laser at 250 mW for 20 seconds; H-halogen light at 275 mW for 20 seconds. Data were analyzed by ANOVA/Tukey's test (alpha=5%). The values of SS (MPa) were statistically lower for the group L3 (1.3)c, followed by groups L1 (2.7)b, L4 (3.4)a, b, L2 (3.7)a, and H (4.5)a. There was no difference in the values of VM when the same time of photoactivation was used, with respective values being L1=70.1a, L2=78.1b, L3=69.9a, L4=78.1b and H=79.9b. All groups showed a PMH of at least 80%. Only the group L1 showed differences in FS (MPa) and FM (GPa), the respective values of 86.2 and 5.4 being lower. Therefore, the use of argon ion laser had influenced the composite resin polymerization. The L3 group presented adequate mechanical properties and minimum SS, reducing the clinical working time for photoactivation of restorations with the tested resin by 50%. (AU)

• Processo FAPESP: 04/14119-0 - Estudo da microdureza knoop x vickers envolvendo diferentes variaveis.
• Beneficiário: Míriam Lacalle Turbino
• Modalidade de apoio: Auxílio à Pesquisa - Regular