Influence of irradiant energy on degree of conversion, polymerization rate and shrinkage stress in an experimental resin composite system

Autor(es)

Calheiros, Fernanda C. ^[1] ; Daronch, Marcia ^{[1, 2]} ; Rueggeberg, Frederick A. ^[2] ; Braga, Roberto R. ^[1]

Afiliação do(s) autor(es)

^[1] Univ Sao Paulo, Sch Dent, Dept Dent Mat, FOUSP, BR-05508900 Sao Paulo - Brazil

^[2] Med Coll Georgia, Dent Mat Sect, Dept Oral Rehabil, Augusta, GA 30912 - USA

• Tipo de documento: Artigo Científico
• Fonte: Dental Materials; v. 24, n. 9, p. 1164-1168, SEP 2008.
• Citações Web of Science: 41

Resumo

Objective. This study evaluated the degree of conversion (DC), maximum rate of cure (R(p)(max)), and polymerization stress (PS) developed by an experimental dental composite subjected to different irradiant energies (3,6,12, 24, or 48J/cm(2)) under constant irradiance (500 mw/cm(2)). Methods. DC and R(p)(max) were monitored for 10 min on the bottom surface of 2-mm thick disks and on 150-mu m thick films (representing the top of the specimen) using ATR-FTIR. PS was monitored for 10 min in 2-mm thick disks bonded to two glass rods (O = 5 mm) attached to a universal testing machine. One-way ANOVA/Tukey tests were used and differences in DC and R(p)(max) between top and bottom surfaces were examined using Student's t-test. Statistical testing was performed at a pre-set alpha of 0.05. Results. For a given surface, DC showed differences among all groups, except at the top between 24 and 48 J/cm(2). R(p)(max) was similar among all groups at the same surface and statistically higher at the top surface. PS also showed significant differences among all groups. Data for 48 J/cm(2) were not obtained due to specimen failure at the glass/composite interface. Significance. Increases in irradiant exposure led to significant increases in DC and PS, but had no effect on R(p)(max) (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved. (AU)

• Processo FAPESP: 03/13002-0 - Influencia da densidade de energia fornecida ao composito sobre o grau de conversao, tensao de contracao, propriedades mecanicas e integridade marginal de restauracoes "in vitro".
• Beneficiário: Fernanda Calabró Calheiros
• Modalidade de apoio: Bolsas no Brasil - Doutorado
• Processo FAPESP: 04/05975-0 - Influencia da densidade de energia fornecida ao composito sobre o grau de conversao, tensao de contracao, propriedades mecanicas e integridade marginal de restauracoes "in vitro".
• Beneficiário: Roberto Ruggiero Braga
• Modalidade de apoio: Auxílio à Pesquisa - Regular