Obtaining and stability verification of superconducting phases of the Nb-Al and Nb-Sn systems by mechanical alloying and low-temperature heat treatments

Autor(es)

Santos, F. A. ^[1] ; Ramos, A. S. ^[2] ; Santos, C. ^[1] ; Rodrigues, Jr., D. ^[1]

Afiliação do(s) autor(es)

^[1] Univ Sao Paulo USP, EEL, Dept Mat Engn, BR-12600970 Lorena, SP - Brazil

^[2] Univ Vale Paraiba IP&D UNIVAP, Inst Pesquisa & Desenvolvimento, BR-12244000 Sao Jose Dos Campos, SP - Brazil

• Tipo de documento: Artigo Científico
• Fonte: Journal of Alloys and Compounds; v. 491, n. 1-2, p. 187-191, FEB 18 2010.
• Citações Web of Science: 5

Resumo

The development of Nb(3)Al and Nb(3)Sn superconductors is of great interest for the applied superconductivity area. These intermetallics composites are obtained normally by heat treatment reactions at high temperature. Processes that allow formation of the superconducting phases at lower temperatures (<1000 degrees C), particularly for Nb(3)Al, are of great interest. The present work studies phase formation and stability of Nb(3)Al and Nb(3)Sn superconducting phases using mechanical alloying (high energy ball milling). Our main objective was to form composites near stoichiometry, which could be transformed into the superconducting phases using low-temperature heat treatments. High purity Nb-Sn and Nb-Al powders were mixed to generate the required superconducting phases (Nb-25at.%Sn and Nb-25at.%Al) in an argon atmosphere glove-box. After milling in a Fritsch mill, the samples were compressed in a hydraulic uniaxial press and encapsulated in evacuated quartz tubes for heat treatment. The compressed and heat treated samples were characterized using X-ray diffractometry. Microstructure and chemical analysis were accomplished using scanning electron microscopy and energy dispersive spectrometry. Nb(3)Al XRD peaks were observed after the sintering at 800 degrees C for the sample milled for 30 h. Nb(3)Sn XRD peaks could be observed even before the heat treatment. (C) 2009 Elsevier B.V. All rights reserved. (AU)

• Processo FAPESP: 01/07025-1 - Estudo sobre a produção de pós via moagem de alta energia de ligas do sistema Ti-Si-B
• Beneficiário: Alfeu Saraiva Ramos
• Modalidade de apoio: Auxílio à Pesquisa - Jovens Pesquisadores