Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

A numerical investigation of constraint effects in circumferentially cracked pipes and fracture specimens including ductile tearing

Texto completo
Autor(es):
Sarzosa, Diego F. B. [1] ; Ruggieri, Claudio [1]
Número total de Autores: 2
Afiliação do(s) autor(es):
[1] Univ Sao Paulo, Dept Naval Architecture & Ocean Engn, BR-05508900 Sao Paulo - Brazil
Número total de Afiliações: 1
Tipo de documento: Artigo Científico
Fonte: INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING; v. 120, p. 1-18, AUG-SEP 2014.
Citações Web of Science: 13
Resumo

This work addresses a two-parameter description of crack-tip fields in bend and tensile fracture specimens incorporating the evolution of near-tip stresses following stable crack growth with increased values of the crack driving force as characterized by J. The primary objective of this study is twofold. First, the present investigation broadens current understanding on the role of constraint and test conditions in defect assessment procedures for pipeline girth welds using SE(T) and SE(B) specimens. Second, the work addresses the potential coupled effects of geometry and ductile tearing on crack-tip constraint as characterized by the J-Q theory which enables more accurate correlations of crack growth resistance behavior in conventional fracture specimens. Plane-strain and 3-D finite element computations including stationary and growth analyses are conducted for 3P SE(B) and clamped SE(T) specimens having different notch depth (a) to specimen width (W) ratio in the range 0.1 <= a/W <= 0.5. Additional 3-D finite element analyses are also performed for circumferentially cracked pipes with a surface flaw having different crack depth (a) over pipe wall thickness (t) ratios and fixed crack length. A computational cell methodology to model Mode I crack extension in ductile materials is utilized to describe the evolution of J with the accompanying evolving near-tip opening stresses. Laboratory testing of an API 5L X70 steel at room temperature using standard, deeply cracked C(T) specimens is used to measure the crack growth resistance curve for the material and to calibrate the key cell parameter defined by the initial void fraction, f(0). A key result emerging from this study is that shallow crack SE(B) specimens can accurately and conservately produce crack growth resistance curves that describe well the measuring toughness capacity of circumferentially cracked pipes under remote bending. The present results provide additional understanding of the effects of constraint on crack growth which contributes to further evaluation of crack growth resistance properties in pipeline steels using SE(T) and SE(B) specimens while, at the same time, eliminating some restrictions against the use of shallow cracked bend specimens in defect assessment procedures. (C) 2014 Elsevier Ltd. All rights reserved. (AU)

Processo FAPESP: 13/01139-2 - Correlação do comportamento à fratura entre dutos com trincas circunferenciais e corpos de prova incluindo o rasgamento dúctil da trinca
Beneficiário:Diego Felipe Sarzosa Burgos
Linha de fomento: Bolsas no Exterior - Estágio de Pesquisa - Pós-Doutorado
Processo FAPESP: 12/00094-2 - Efeitos de Triaxilidade de tensões e relações J vs. CTOD em corpos-de-prova SE(T) com aplicações à avaliação de defeitos em risers com trincas estacionárias e em propagação
Beneficiário:Diego Felipe Sarzosa Burgos
Linha de fomento: Bolsas no Brasil - Pós-Doutorado
Processo FAPESP: 12/13053-2 - Desenvolvimentos adicionais de um modelo micromecânico de fratura frágil e aplicações à metodologia da curva mestra
Beneficiário:Claudio Ruggieri
Linha de fomento: Auxílio à Pesquisa - Regular