An investigation of the effect of nanoparticle composition and dimension on the heat transfer coefficient during flow boiling of aqueous nanofluids in small diameter channels (1.1 mm)

Autor(es)

Moreira, Tiago Augusto ^[1] ; do Nascimento, Francisco juilo ^[1] ; Ribatski, Gherhardt ^[1] ; Grp, Heat Transfer Res

Afiliação do(s) autor(es)

^[1] Sao Carlos Sch Engn EESC, Dept Mech Engn, Av Trabalhador Sao Carlense 400, BR-13566590 Sao Carlos, SP - Brazil

• Tipo de documento: Artigo Científico
• Fonte: EXPERIMENTAL THERMAL AND FLUID SCIENCE; v. 89, p. 72-89, DEC 2017.
• Citações Web of Science: 10

Resumo

The present paper concerns an experimental investigation of the effect of adding nanoparticles to DI-water on the heat transfer coefficient during flow boiling in a 1.1 mm ID tube. Results were obtained for DI-water and solutions of Al2O3 (20-30 nm)/DI-water, Al2O3 (40-80 nm)/DI-water, SiO2 (80 nm)/DI-water, SiO2 (15 nm)/DIwater and Cu (25 nm)/DI-water for nanoparticles volumetric concentrations of 0.001, 0.01 and 0.1%. Additional results were obtained for pure DI-water before and after performing tests with nanofluids in order to evaluate the effect of nanoparticles deposition due to the boiling process on the heat transfer coefficient. Experiments were carried out for heat fluxes up to 350 kW/m(2), mass velocities ranging from 200 to 600 kg/m(2) s, vapor qualities up to 0.5 and saturation temperatures at the test section outlet of 102 degrees C. An analysis of the surface roughness and a characterization of its texture using an optical profiler were also performed before and after the experiments with nanofluids. According to most of the results, the heat transfer coefficient for flow boiling of nanofluids is lower than for DI-water in a tube without nanoparticles deposition. The data analyses revealed that the nano particles dimension affects the heat transfer behavior. This fact is associate to the nanoparticles deposition on the surface and its effect on the density of active nucleation sites. This hypothesis is corroborated by the fact that the deposition characteristics depends on the nanoparticles size. (AU)

• Processo FAPESP: 11/13119-0 - Estudo do efeito da adição de nanopartículas a um fluido base no fluxo crítico de calor durante a ebulição convectiva no interior de microcanais e nos mecanismos de remolhamento da superfície submetida a ebulição em filme
• Beneficiário: Francisco Júlio do Nascimento
• Modalidade de apoio: Bolsas no Brasil - Doutorado
• Processo FAPESP: 13/02869-4 - Influência da adição de nanopartículas de alumina a água no coeficiente de transferência de calor durante a ebulição convectiva em microcanais
• Beneficiário: Tiago Augusto Moreira
• Modalidade de apoio: Bolsas no Brasil - Iniciação Científica
• Processo FAPESP: 16/16849-3 - Análise teórica-experimental do coeficiente de transferência de calor, perda de pressão e padrão de escoamento durante a condensação de misturas zeotrópicas de hidrocarbonetos no interior de tubos
• Beneficiário: Tiago Augusto Moreira
• Modalidade de apoio: Bolsas no Brasil - Doutorado