Cyclic fatigue and torsional strength of three different thermally treated reciprocating nickel-titanium instruments

Autor(es)

Alcalde, Murilo Priori ^[1] ; Hungaro Duarte, Marco Antonio ^[1] ; Bramante, Clovis Monteiro ^[1] ; de Vasconselos, Bruno Carvalho ^[2] ; Tanomaru-Filho, Mario ^[3] ; Guerreiro-Tanomaru, Juliane Maria ^[3] ; Pinto, Jader Camilo ^[3] ; Reis So, Marcus Vinicius ^[4] ; Vivan, Rodrigo Ricci ^[1]

Afiliação do(s) autor(es)

^[1] Univ Sao Paulo, Bauru Dent Sch, Dept Restorat Dent Dent Mat & Endodont, Dr Otavio Pinheiro Brisolla 9-75, BR-17012901 Bauru, SP - Brazil

^[2] Univ Fed Ceara, Dept Endodont, Campus Sobral Cel Stanislau Frota St, Sobral, Ceara - Brazil

^[3] Sao Paulo State Univ, Araraquara Dent Sch, Dept Restorat Dent, R Humaita 1680, Araraquara, SP - Brazil

^[4] Univ Fed Rio Grande do Sul, Dept Restorat Dent, Paulo Gama Ave 110, Porto Alegre, RS - Brazil

• Tipo de documento: Artigo Científico
• Fonte: CLINICAL ORAL INVESTIGATIONS; v. 22, n. 4, p. 1865-1871, MAY 2018.
• Citações Web of Science: 12

Resumo

Objectives The aim of this study was to evaluate the cyclic and torsional fatigue resistance of the reciprocating single-file systems Reciproc Blue 25.08 (VDW GmbH, Munich, Germany), Prodesign R 25.06 (Easy Dental Equipment, Belo Horizonte, Brazil), and WaveOne Gold 25.07 (Dentsply/Tulsa Dental Specialties, Tulsa, OK, USA). Materials and methods Sixty reciprocating instruments of the systems Reciproc Blue R25 (RB \#25.08 taper), Prodesign R (PDR \#25.06 taper), and WaveOne Gold (WOG \#25.07 taper) (n = 20) were used. Cyclic fatigue resistance testing was performed by measuring the time to failure in an artificial stainless steel canal with a 60 degrees angle of curvature and a 5-mmradius located 5 mm from the tip (n = 10). The torsional test (ISO 3630-1) evaluated the torque and angle of rotation at failure of new instruments (n = 10) in the portion 3 mm from the tip. The fractured surface of each fragment was also observed using scanning electron microscopy (SEM). In addition, a supplementary examination was performed to measure the cross-sectional area of each instrument 3 and 5 mm from the tip. The data were analyzed using one-way ANOVA and Tukey's test, and the level of significance was set at 5%. Results The cyclic fatigue resistance values of PDR 25.06 were significantly higher (P < 0.05). RB 25.08 showed higher fatigue resistance than WOG 25.07 (P < 0.05). The torsional test showed that PDR 25.06 had lower torsional strength (P < 0.05). No differences were observed between RB 25.08 and WOG 25.07 (P > 0.05). PDR 25.06 showed higher angular rotation values than RB 25.08 and WOG 25.07 (P < 0.05). RB 25.08 presented higher angular rotation than WOG 25.07 (P < 0.05). The cross-sectional area analysis showed that PDR 25.06 presented the smallest cross-sectional areas at 3 and 5 mm from the tip (P < 0.05). Conclusion PDR 25.06 presented the highest cyclic fatigue resistance and angular rotation until fracture compared to RB 25.08 and WOG 25.07. In addition, RB 25.08 and WOG 25.07 had higher torsional strength than PDR 25.06. (AU)

• Processo FAPESP: 14/25520-0 - Avaliação das propriedades químicas, resistência torcional e flexural, caracterização geométrica e superficial de instrumentos endodônticos em função do tratamento da liga: análise após 3 vezes simulando uso clínico
• Beneficiário: Rodrigo Ricci Vivan
• Modalidade de apoio: Auxílio à Pesquisa - Regular