Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

Preparation of Activated Carbon from Sugarcane Bagasse and Removal of Color and Organic Matter from Real Textile Wastewater

Texto completo
Autor(es):
da Costa, Wiviane Kassia Oliveira Correia [1] ; Gavazza, Savia [2] ; Duarte, Marta Maria Menezes Bezerra [3] ; Freitas, Sueny Kelia Barbosa [4] ; de Paula, Nattany Tayany Gomes [1] ; Paim, Ana Paula Silveira [1]
Número total de Autores: 6
Afiliação do(s) autor(es):
[1] Univ Fed Pernambuco, Ctr Ciencias Exatas E Natureza, Dept Quim Fundamental, Ave Jornalista Anibal Fernandes, S-N, BR-50740550 Recife, PE - Brazil
[2] Univ Fed Pernambuco, Lab Saneamento Ambiental, Dept Engenharia Civil Ambiental, Ave Acad Helio Ramos, S-N, BR-50740530 Recife, PE - Brazil
[3] Univ Fed Pernambuco, Ctr Tecnol Geociencias, Dept Engenharia Quim, Ave Economistas, S-N, BR-50740590 Recife, PE - Brazil
[4] Univ Fed Rural Pernambuco, Unidade Acad Serra Talhada, Ave Gregorio Ferraz Nogueira, S-N, BR-56909535 Serra Talhada, PE - Brazil
Número total de Afiliações: 4
Tipo de documento: Artigo Científico
Fonte: WATER AIR AND SOIL POLLUTION; v. 232, n. 9 SEP 2021.
Citações Web of Science: 0
Resumo

Textile wastewaters (TW) contain contaminants such as organic matter, dyes, sulfate, and many salts. Many methods have been used to remove these pollutants and to reduce the environmental impact associated with their release into water bodies. In the present study, physically activated carbon made of sugar cane bagasse was used as an adsorbent to remove color and chemical oxygen demand (COD) from textile effluent. The experiments were carried out with a real effluent from a textile jeans laundry. The effect of the variables, such as adsorbent amount, pH, contact time, temperature, and particle size of the adsorbent, was tested. The most efficient results were obtained for the adsorbent mass of 0.25 g, pH 6.0, contact time of 60 min, and adsorbent size smaller than 0.42 mm. The adsorbent performed well for color removal of textile effluent, removing up to 93% and 55% of color and COD, respectively. The Brunauer-Emmett-Teller (BET) surface area and total pore volume were 188.2 m(2) g(-1) and 0.13 cm(3) g(-1), respectively, and average sizes of pore diameter of 2.7 nm and 3.6 nm. This indicates the ability of agro-industrial waste for application in the process of textile wastewater treatment. (AU)

Processo FAPESP: 14/50951-4 - INCT 2014: Tecnologias Analíticas Avançadas
Beneficiário:Celio Pasquini
Modalidade de apoio: Auxílio à Pesquisa - Temático