Surface characterization of polymers used in fabrication of interim prostheses after treatment with photopolymerized glaze

Autor(es)

dos Santos, Daniela Micheline ; Commar, Betina Chiarelo ; Bonatto, Liliane da Rocha ; Freitas da Silva, Emily Vivianne ; Sonego, Mariana Vilela ; Rangel, Elidiane Cipriano ; Pesqueira, Aldieris Alves ; Goiato, Marcelo Coelho

• Tipo de documento: Artigo Científico
• Fonte: Materials Science & Engineering C-Materials for Biological Applications; v. 71, p. 755-763, FEB 1 2017.
• Citações Web of Science: 0

Resumo

The material used for interim prostheses fabrication must present excellent physical properties for greater longevity in the face of environmental conditions, which can occur in the oral cavity. The purpose of this study was to evaluate the effect of a photopolymerized glaze on the physical and mechanical properties of polymers used for the fabrication of interim prostheses, before and after thermocycling and immersion in staining solutions. One hundred samples of composite and acrylic resins were fabricated: Dencor chemically activated acrylic resin (CAAR) (n = 20) and heat-polymerized acrylic resin (HPAR) (n = 20), Charisma (n = 20), Structur (n = 20), and Protemp (n = 20). A mechanical polishing was performed on half of the samples, and a chemical polishing was performed on the remaining samples. Subsequently, all samples were submitted to thermocycling and immersion in coffee staining solution for 21 days. Analysis of color and microhardness, as well as atomic force microscopy (AFM), scanning electron microscopy (SEM), and energy dispersive x-ray spectrometry (EDS) were performed. The data were submitted to repeated-measures analysis of variance (ANOVA), followed by the Tukey test (alpha = 0.05) and the Student t-test (alpha = 0.05). It was verified that the glaze decreased the chromatic alteration values, and increased the microhardness values of the samples, with the exception of the Charisma resin. The samples that did not receive chemical polishing had the greatest number of surface irregularities. This study concluded that the groups with glaze presented less color alteration. In addition, Charisma and Structur resins exhibited the greatest chromatic stability. As to the microhardness, the values were greater when the samples were treated with the glaze, with the exception of the Charisma group. (C) 2016 Elsevier B.V. All rights reserved. (AU)

• Processo FAPESP: 13/21383-5 - Caracterização da superfície de polímeros utilizados na confecção de próteses provisórias após tratamento com glaze fotopolimerizável
• Beneficiário: Betina Chiarelo Commar
• Modalidade de apoio: Bolsas no Brasil - Iniciação Científica