Three-body wear effect on different CAD/CAM ceramics staining durability

Autor(es)

Dal Piva, Amanda M. O. ^{[1, 2, 3]} ; Tribst, Joao P. M. ^{[1, 2, 3]} ; Werner, Arie ^{[2, 3]} ; Anami, Lilian C. ^[4] ; Bottino, Marco A. ^[1] ; Kleverlaan, Cornelis J. ^{[2, 3]}

Afiliação do(s) autor(es)

^[1] Sao Paulo State Univ Unesp SJC, Inst Sci & Technol, Dept Dent Mat & Prosthodont, Postgrad Program Restorat Dent Prosthodont, Engenheiro Francisco Jose Longo Ave 777, BR-12245000 Sao Jose Dos Campos, SP - Brazil

^[2] Univ Amsterdam, Acad Ctr Dent Amsterdam ACTA, Dept Dent Mat Sci, Gustav Mahlerlaan 3004, NL-1081 LA Amsterdam, Noord Holland - Netherlands

^[3] Vrije Univ, Gustav Mahlerlaan 3004, NL-1081 LA Amsterdam, Noord Holland - Netherlands

^[4] Santo Amaro Univ UNISA, Dept Dent, R Prof Eneas de Siqueira Neto 340, BR-04829300 Sao Paulo, SP - Brazil

• Tipo de documento: Artigo Científico
• Fonte: JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS; v. 103, MAR 2020.
• Citações Web of Science: 0

Resumo

Regardless the materials properties, the vast majority of ceramic restorations could require an individualization through the extrinsic staining to improve aesthetics. This study aimed to compare the staining wear durability of different monolithic ceramics. Specimens of high translucent zirconia (YZHT), zirconia reinforced lithium silicate (ZLS), hybrid ceramic (HC) and feldspathic ceramic (FLD) were divided in five groups according to each material staining technique. The ZLS ceramic was tested with stained prior (ZLS1) and after crystallization (ZLS2). All specimens were extrinsically characterized, i.e. stained, and crystallized or sintered in specific ovens, according to the manufacturer's recommendation. The specimens were submitted to three-body wear tests in ACTA wear machine, simulating the presence of food bolus and antagonist (pH 7, 15 N, 1 Hz). The wear rate of the stain surface was determined after 5 intervals of 200,000 cycles, using a profilometer. The ceramic surface before and after staining, and after wear were inspected by Scanning Electron Microscopy (SEM). The wear rates were analyzed using two-way ANOVA and post-hoc Tukey test. The wear rates of the staining were affected by ceramic and the number of cycles (P < 0.001). 100% of staining was removed after 200,000 cycles for HC, and after 600,000 cycles for YZHT and ZLS1. Staining of ZLS2 and FLD remained on ceramic surface even after 1,000,000 cycles. Furthermore, FLD showed a significant higher staining durability than ZLS2. SEM revealed different surface morphologies for each group with and without staining and after the wear test. Ceramics with fired staining showed higher durability compared to the polymerized one. The feldspar ceramic presented superior staining durability, followed by zirconia reinforced lithium silicate and high translucent zirconia. The conventional two steps staining technique showed improved durability for zirconia reinforced lithium silicate. (AU)

• Processo FAPESP: 18/05908-4 - Avaliação da durabilidade da camada de caracterização sobre cerâmicas monolíticas
• Beneficiário: Lilian Costa Anami Paulin
• Modalidade de apoio: Auxílio à Pesquisa - Regular
• Processo FAPESP: 17/11535-3 - Influência da espessura da cerâmica no comportamento biomecânico, sobrevivência e translucidez de coroas monolíticas
• Beneficiário: Amanda Maria de Oliveira Dal Piva
• Modalidade de apoio: Bolsas no Brasil - Doutorado
• Processo FAPESP: 18/07404-3 - Influência dos tratamentos superficiais prévios à maquiagem sobre a resistência ao desgaste de uma cerâmica híbrida
• Beneficiário: João Paulo Mendes Tribst
• Modalidade de apoio: Bolsas no Exterior - Estágio de Pesquisa - Doutorado
• Processo FAPESP: 18/03984-5 - O efeito do desgaste na maquiagem de diferentes cerâmicas monolíticas
• Beneficiário: Amanda Maria de Oliveira Dal Piva
• Modalidade de apoio: Bolsas no Exterior - Estágio de Pesquisa - Doutorado