Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

Comparing the corrosion behaviour of AA2050 and AA7050 aluminium alloys by scanning vibrating electrode and scanning ion-selective electrode techniques

Texto completo
Autor(es):
De Viveiros, Barbara Victoria Goncalves [1] ; Donatus, Uyime [1] ; Cavalieri De Alencar, Maicon [1] ; Berbel, Larissa Oliveira [1] ; Costa, Isolda [1]
Número total de Autores: 5
Afiliação do(s) autor(es):
[1] IPEN CNEN, Inst Pesquisas Energet & Nucl, Av Prof Lineu Prestes, BR-2242 Sao Paulo - Brazil
Número total de Afiliações: 1
Tipo de documento: Artigo Científico
Fonte: CORROSION ENGINEERING SCIENCE AND TECHNOLOGY; OCT 2021.
Citações Web of Science: 0
Resumo

The susceptibility to localised corrosion of the high strength alloys, AA2050-T84 and AA7050-T7451, used in the aerospace industry, was investigated in this study by localised electrochemical techniques, specifically, scanning vibrating electrode technique (SVET) and scanning ion-selective electrode technique (SIET), in 0.005 mol L-1 NaCl solution. The study was initially carried out using both alloys individually and then, coupling the two alloys and evaluating the effect of galvanic coupling between them. The results revealed that the AA2050-T84, being nobler than the AA7050-T7451, presented higher corrosion current density values when tested in isolation and the depth of corrosion penetration was significantly deeper in the AA2050-T84 alloy than in the AA7050-T7451. However, galvanic coupling of the two alloys resulted in cathodic protection of the AA2050-T84 alloy and a reduction in corrosion current densities on both alloys. (AU)

Processo FAPESP: 13/13235-6 - Estudo da corrosão localizada e caracterização da resistência à corrosão associada à fadiga na região de solda em ligas de alumínio de elevada resistência soldadas por fricção (FSW)
Beneficiário:Isolda Costa
Modalidade de apoio: Auxílio à Pesquisa - Temático
Processo FAPESP: 17/03095-3 - Investigação da suscetibilidade à corrosão de ligas Al-Cu-Li com solda por atrito (FSW) utilizando a técnica de varredura do eletrodo vibratório (SVET)
Beneficiário:Uyime Donatus
Modalidade de apoio: Bolsas no Brasil - Pós-Doutorado