Effect of Superstructure Materials and Misfit on Stress Distribution in a Single Implant-Supported Prosthesis: A Finite Element Analysis

Autor(es)

Assuncao, Wirley Goncalves ^[1] ; Gomes, Erica Alves ^[1] ; Ricardo Barao, Valentim Adelino ^[1] ; Delben, Juliana Aparecida ^[1] ; Tabata, Lucas Fernando ^[1] ; Capello de Sousa, Edson Antonio ^[2]

Afiliação do(s) autor(es)

^[1] Univ Estadual Paulista, Aracatuba Dent Sch, Dept Dent Mat & Prosthodont, BR-16015050 Sao Paulo - Brazil

^[2] Univ Estadual Paulista, Bauru Engn Sch, Dept Mech Engn, BR-16015050 Sao Paulo - Brazil

• Tipo de documento: Artigo Científico
• Fonte: JOURNAL OF CRANIOFACIAL SURGERY; v. 21, n. 3, p. 689-695, MAY 2010.
• Citações Web of Science: 14

Resumo

This finite element analysis study evaluated the optimal material combination for the superstructure of single implant-supported prosthesis with different fit patterns. Two models of a two-dimensional finite element analysis were constructed: group A (control), prosthesis presenting precise fit to implant; and group B, prostheses with unilateral angular misfit of 100 Km. Each group was divided into 5 subgroups according to different materials for framework (gold alloy, titanium, and zirconia) and veneering (porcelain and modified composite resin). Evaluation was performed on ANSYS software with 133-N load applied at the opposite side of misfit on the model. The load was applied with a 30-degree angulation and 2-mm off-axis. The presence of unilateral angular misfit (group B) increased the von Mises stresses in the implant (40%) and retention screw (7%) in comparison to group A. The combination of porcelain/titanium and porcelain/zirconia displayed more favorable stress distribution. When gold alloy was used as a framework material, there was no difference in stress values for both veneering materials in all groups. The use of stiffer and softer superstructures materials did not affect the stress distribution and stress values in the supporting tissue. According to the biomechanical point of view, materials with high elasticity modulus are more suitable for the superstructure of implant-supported prosthesis. (AU)

• Processo FAPESP: 07/55073-1 - Influência da desadaptação em diferentes pilares e dois materiais de recobrimento estético no sistema coroa-implante-parafuso de retenção avaliação pelo MEF-2D
• Beneficiário: Wirley Goncalves Assuncao
• Modalidade de apoio: Auxílio à Pesquisa - Regular