Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

Effect of enzymatic treatment on the cross-flow microfiltration of acai pulp: Analysis of the fouling and recovery of phytochemicals

Texto completo
Autor(es):
Donato Machado, Rita Margarete [1] ; Haneda, Renata Natsumi [2] ; Trevisan, Bruno Peruchi [3] ; Fontes, Sergio Rodrigues [4]
Número total de Autores: 4
Afiliação do(s) autor(es):
[1] Univ Sao Paulo. Dept Mech Engn
[2] Univ Sao Paulo. Dept Mech Engn
[3] Univ Sao Paulo. Dept Mech Engn
[4] Univ Sao Paulo. Dept Mech Engn
Número total de Afiliações: 4
Tipo de documento: Artigo Científico
Fonte: Journal of Food Engineering; v. 113, n. 3, p. 442-452, DEC 2012.
Citações Web of Science: 15
Resumo

This study aimed to investigate the effects of pectinase enzyme treatment of acai pulp on cross-flow microfiltration (CFMF) performance and on phytochemical and functional characteristics of their compounds. Analyses of fouling mechanisms were carried out through resistance in series and blocking in law models. The enzymatic treatment was conducted using Ultrazym(R) AFPL (Novozymes A/S) at 500 mg kg(-1) of acai pulp for 30 min at 35 degrees C. Before microfiltrations, untreated and enzyme-treated acai pulps were previously diluted in distilled water (1:3; w/v). CFMFs were conducted using commercial alpha-alumina (alpha-Al2O3) ceramic membranes (Andritz AG, Austria) of 0.2 mu m and 0.8 mu m pore sizes, and 0.0047 m(2) of filtration area. The microfiltration unit was operated in batch mode for 120 min at 25 degrees C and the fluid-dynamic conditions were transmembrane pressure of Delta P = 100 kPa and cross-flow velocity of 3 m s(-1) in turbulent flow. The highest values of permeate flux and accumulated permeate volume were obtained using enzyme-treated pulp and 0.2 mu m pore size membranes with steady flux values exceeding 100 L h(-1) m(-2). For the 0.8 mu m pore size membrane, the estimated total resistance after the microfiltration of enzyme-treated acai pulp was 21% lower than the untreated pulp, and for the 0.2 mu m pore size membrane, it was 18%. Cake filtration was the dominant mechanism in the early stages of most of the CFMF processes. After approximately 20 min, however, intermediate pore blocking and complete pore blocking contributed to the overall fouling mechanisms. The reduction of the antioxidant capacity of the permeates obtained after microfiltration of the enzyme-treated pulp was higher (p < 0.01) than that obtained using untreated pulp. For total polyphenols, on the contrary, the permeates obtained after microfiltration of the enzyme-treated pulp showed a lower mean reduction (p < 0.01) than those from the untreated pulp. The results show that the enzymatic treatment had a positive effect on the CFMF process of acai pulp. (C) 2012 Elsevier Ltd. All rights reserved. (AU)

Processo FAPESP: 09/05938-1 - Estudo da utilização da tecnologia de microfiltração tangencial no processamento de açaí e seus efeitos na caracterização química e funcional de seus componentes
Beneficiário:Rita Margarete Donato Machado
Modalidade de apoio: Bolsas no Brasil - Pós-Doutorado