Busca avançada
Ano de início
Entree
(Referência obtida automaticamente do Web of Science, por meio da informação sobre o financiamento pela FAPESP e o número do processo correspondente, incluída na publicação pelos autores.)

Heat treatment of silanized feldspathic ceramic: Effect on the bond strength to resin after thermocycling

Texto completo
Autor(es):
Goncalves de Figueiredo, Viviane Maria [1] ; Corazza, Pedro Henrique [2] ; Souto Lepesqueur, Laura Soares [1] ; Miranda, Geraldo M. [3] ; Pagani, Clovis [3] ; de Melo, Renata Marques [1] ; Valandro, Luiz Felipe [4]
Número total de Autores: 7
Afiliação do(s) autor(es):
[1] Sao Paulo State Univ UNESP, Dept Dent Mat & Prosthodont, Inst Sci & Technol Sao Jose dos Campos, BR-12245000 Sao Paulo - Brazil
[2] Univ Passo Fundo, Postgrad Program Dent, Sch Dent, BR-99001970 Passo Fundo, RS - Brazil
[3] Sao Paulo State Univ UNESP, Dept Restorat Dent, Inst Sci & Technol Sao Jose dos Campos, BR-12245000 Sao Paulo - Brazil
[4] Univ Fed Santa Maria, Prosthodont Unit, Fac Odontol, BR-97015372 Santa Maria, RS - Brazil
Número total de Afiliações: 4
Tipo de documento: Artigo Científico
Fonte: INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES; v. 63, p. 96-101, DEC 2015.
Citações Web of Science: 2
Resumo

Purpose: This study aimed to evaluate the effect of heat treatment (at 77 degrees C) of a silanized feldspathic ceramic on microtensile bond strength (mu TBS) with a resin cement before and after being aged by thermocycling. Material and methods: Twenty-four blocks (12 x 10 x 4 mm(3)) of a CAD/CAM feldspathic ceramic (Vita-blocks Mark II, Vita) were obtained and randomly divided into three groups, according to the surface treatment prior to the cementation: Group AS - hydrofluoric acid 10%+silane; Group S77 - silane+heating at 77 degrees C for 60 s; and Group AS77 - hydrofluoric acid 10%+ silane+ heating at 77 degrees C for 60s. Ceramic blocks were cemented to composite resin blocks with a resin cement. The sets were subsequently cross-sectioned into 1 mm(2) beams for mu TBS testing. The beams of each group were randomly divided into two subgroups: aging (thermocycling, 12,000 cycles between 5 degrees C and 55 degrees C) and non-aging (tested immediately). One-way ANOVA and Tukey's test (alpha=0.05) and Weibull analysis (95% CI) were used to analyze the data. Results: Group AS77 had the lowest pre-test failure number during the cutting among the groups. There was no significant difference (p=0.255) between the mu TBS mean values of the non-aged groups. After aging, the mean value of S77 was significantly lower than those of AS77 and AS (p=0.005). There was no difference in the Weibull modulus (m) and characteristic strength (sigma(0)) of the aged and non-aged groups for all comparisons. Before aging, heat treatment of silanized feldspathic ceramic (non acid-etched surface) demonstrated bond strength similar to that achieved with hydrofluoric-acid-etching treatment however, it had lower bond strength after aging. Conclusion: The combination of hydrofluoric-acid-etching treatment with heat treatment silanized feldspathic ceramic did not improve the bond strength of the interface. (C) 2015 Elsevier Ltd. All rights reserved. (AU)

Processo FAPESP: 12/10573-5 - Efeito do tratamento térmico em cerâmica feldspática silanizada na adesão ao cimento resinoso
Beneficiário:Clovis Pagani
Linha de fomento: Auxílio à Pesquisa - Regular