In vitro analysis of durability of S-PRG filler-containing composite crowns for primary molar restoration

Autor(es):Mostrar menos -

Nakase, Yutaro ; Yamaguchi, Satoshi ; Jalkh, Ernesto B. Benalcazar ; Atria, Pablo J. ; Witek, Lukasz ; Bonfante, Estevam A. ; Li, Hefei ; Sakai, Takahiko ; Okawa, Rena ; Nakano, Kazuhiko ; Imazato, Satoshi

• Tipo de documento: Artigo Científico
• Fonte: Dental Materials; v. 39, n. 7, p. 8-pg., 2023-06-28.

Resumo

Objective: To evaluate the reliability, maximum principal stress, shear stress, and crack initiation of a computer-aided design/computer-aided manufacturing (CAD/CAM) resin composite (RC) incorporating surface pre-re-acted glass (S-PRG) filler for primary molar teeth.Methods: Mandibular primary molar crowns fabricated by experimental (EB) or commercially available CAD/CAM RCs (HC) were prepared and cemented to a resinous abutment tooth using an adhesive resin cement (Cem) or a conventional glass-ionomer cement (CX). These specimens were subjected to a single compressive test (n = 5/each) and the step-stress accelerated life testing (SSALT) (n = 12/each). Data was evaluated using Weibull analyses and reliability was calculated. Afterwards, the maximum principal stress and crack initiation point of each crown was analyzed by finite element analysis. To evaluate bonding of EB and HC to dentin, microtensile bond strength (& mu;TBS) testing was conducted using primary molar teeth (n = 10/each).Results: There was no significant difference between the fracture loads of EB and HC for either cement (p > 0.05). The fracture loads of EB-CX and HC-CX were significantly lower than EB-Cem and HC-Cem (p < 0.05). The reliability at 600 N for EB-Cem was greater than that for EB-CX, HC-Cem, and HC-CX. The maximum principal stress concentrated on EB was lower than that on HC. The shear stress concentrated in the cement layer for EB-CX was higher than that for HC-CX. There was no significant difference among the & mu;TBSs of EB-Cem, EB-CX, HC-Cem, and HC-CX (p > 0.05).Significance: The crowns fabricated with the experimental CAD/CAM RC incorporating S-PRG filler yielded greater fracture loads and reliability than the crowns manufactured with commercially available CAD/CAM RC regardless of the luting materials. These findings suggest that the experimental CAD/CAM RC crown may be clinically useful for the restoration of primary molars. (AU)

• Processo FAPESP: 21/06730-7 - Rumo à zircônia sustentável reciclada a partir do descarte de usinagem e melhorada por infiltração graduada e ao desenvolvimento de blocos de zircônia multicamada resistentes, graduados, e não suscetíveis ao envelhecimento
• Beneficiário: Estevam Augusto Bonfante
• Modalidade de apoio: Auxílio à Pesquisa - Jovens Pesquisadores - Fase 2
• Processo FAPESP: 19/00452-5 - COMPÓSITOS EXPERIMENTAIS 70%Al2O3-30%ZrO2: CARACTERIZAÇÃO MECÂNICA, ESTRUTURAL E TOPOGRÁFICA
• Beneficiário: Ernesto Byron Benalcazar Jalkh
• Modalidade de apoio: Bolsas no Exterior - Estágio de Pesquisa - Doutorado
• Processo FAPESP: 18/03072-6 - Compósitos experimentais 70%Al2O3-30%ZrO2: caracterização estrutural e da sobrevida antes e após envelhecimento
• Beneficiário: Ernesto Byron Benalcazar Jalkh
• Modalidade de apoio: Bolsas no Brasil - Doutorado