Six-month evaluation of adhesives interface created by a hydrophobic adhesive to acid-etched ethanol-wet bonded dentine with simplified dehydration protocols

Autor(es)

Sadek, Fernando T. ^[1] ; Mazzoni, Annalisa ^[2] ; Breschi, Lorenzo ^{[3, 4]} ; Tay, Franklin R. ^[5] ; Braga, Roberto R. ^[1]

Afiliação do(s) autor(es)

^[1] Univ Sao Paulo, Sch Dent, Dept Dent Mat, Sao Paulo - Brazil

^[2] Univ Bologna, Dept SAU & FAL, Bologna - Italy

^[3] IOR, Unit Bologna, CNR, IGM, Bologna - Italy

^[4] Univ Trieste, Dept Biomed, Div Dent Sci & Biomat, Trieste - Italy

^[5] Med Coll Georgia, Sch Dent, Dept Endodont, Augusta, GA 30912 - USA

• Tipo de documento: Artigo Científico
• Fonte: Journal of Dentistry; v. 38, n. 4, p. 276-283, APR 2010.
• Citações Web of Science: 30

Resumo

Objectives: To evaluate the efficacy of simplified dehydration protocols, in the absence of tubular occlusion, on bond strength and interfacial nanoleakage of a hydrophobic experimental adhesive blend to acid-etched, ethanol-dehydrated dentine immediately and after 6 months. Methods: Molars were randomly assigned to 6 treatment groups (n = 5). Under pulpal pressure simulation, dentine crowns were acid-etched with 35% H(3)PO(4) and rinsed with water. Adper Scotchbond Multi-Purpose was used for the control group. The remaining groups had their dentine surface dehydrated with ethanol solutions: group 1 = 50%, 70%, 80%, 95% and 3 x 100%, 30 s for each application; group 2 the same ethanol sequence with 15 s for each solution; groups 3, 4 and 5 used 100% ethanol only, applied in seven, three or one 30 s step, respectively. After dehydration, a primer (50% BisGMA + TEGDMA, 50% ethanol) was used, followed by the neat comonomer adhesive application. Resin composite build-ups were then prepared using an incremental technique. Specimens were stored for 24 h, sectioned into beams and stressed to failure after 24 h or after 6 months of artificial ageing. Interfacial silver leakage evaluation was performed for both storage periods (n = 5 per subgroup). Results: Group 1 showed higher bond strengths at 24 h or after 6 months of ageing (45.6 +/- 5.9(a)/43.1 +/- 3.2(a) MPa) and lower silver impregnation. Bond strength results were statistically similar to control group (41.2 +/- 3.3(ab)/38.3 +/- 4.0(ab) MPa), group 2 (40.0 +/- 3.1(ab)/38.6 +/- 3.2(ab) MPa), and group 3 at 24 h (35.5 +/- 4.3(ab) MPa). Groups 4 (34.6 +/- 5.7(bc)/25.9 +/- 4.1(c) MPa) and 5 (24.7 +/- 4.9(c)/18.2 +/- 4.2(c) MPa) resulted in lower bond strengths, extensive interfacial nanoleakage and more prominent reductions (up to 25%) in bond strengths after 6 months of ageing. Conclusions: Simplified dehydration protocols using one or three 100% ethanol applications should be avoided for the ethanol-wet bonding technique in the absence of tubular occlusion, as they showed decreased bond strength, more severe nanoleakage and reduced bond stability over time. (C) 2009 Elsevier Ltd. All rights reserved. (AU)

• Processo FAPESP: 07/55117-9 - Desenvolvimento de técnicas alternativas para melhorar a adesão e a longevidade de restaurações em compósito utilizando sistemas adesivos hidrofóbicos
• Beneficiário: Fernanda Tranchesi Sadek
• Modalidade de apoio: Bolsas no Brasil - Pós-Doutorado