Plan of Implementation of the Year 2018 Technical Reserve Parcel (Base 2017) for Infrastructure Institutional Costs Center for Physical Sciences and Technology (CCET) UFSCAR

• Grant number: 18/24614-1
• Support Opportunities: Research Grants - Technical Reserve for Institutional Research Infrastructure
• Start date: March 01, 2019
• End date: February 28, 2026
• Field of knowledge: Interdisciplinary Subjects
• Principal Investigator: Luiz Fernando de Oriani e Paulillo
• Grantee: Luiz Fernando de Oriani e Paulillo
• Host Institution: Centro de Ciências Exatas e de Tecnologia (CCET). Universidade Federal de São Carlos (UFSCAR). São Carlos , SP, Brazil

Abstract

Regular project presented by the Center for Physical Sciences and Technology of the Federal University of São Carlos, in accordance with the standards applicable to use of institutional technical reserve approved by the CTAand Superior Council of FAPESP , describing the academic setting , human resources and infrastructure for research of the 14 departments and twelve postgraduate programs linked to CCET , along with budgets and justifications for the financial resources approved for the base year 2017, exercise 2018. (AU)

Scientific publications

(5)

(References retrieved automatically from Web of Science and SciELO through information on FAPESP grants and their corresponding numbers as mentioned in the publications by the authors)

CRUZ, D. C.; SORDI, V. L.; VENTURA, C. E. H.. Assessment of the surface integrity of ground cemented tungsten carbide cutting inserts and its influence on tool wear in turning of ferritic nodular cast iron. CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, v. 37, p. 10-pg., 2022-04-02. (17/12309-7, 17/12304-5, 18/24614-1, 15/15622-2)

PARIS, D.; RUBIO, J. C. C.; CRUZ, D. C.; ANTONIALLI, A. I. S.; VENTURA, C. E. H.. An analysis of the surface roughness of Ti-15Mo alloy machined with uncoated cemented tungsten carbide cutting inserts with different geometries. Journal of the Brazilian Society of Mechanical Sciences and Engineering, v. 44, n. 7, p. 9-pg., 2022-07-01. (17/12309-7, 18/24614-1, 15/15622-2, 17/12304-5)

PIVOTTO, L. B.; ANTONIALLI, A. I. S.; VENTURA, C. E. H.. Tribological aspects of tool wear during turning Ti-15Mo alloy with cemented tungsten carbide cutting inserts prepared with different surface finishes. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, v. 237, n. 1, p. 9-pg., 2022-04-07. (17/12309-7, 17/12304-5, 18/24614-1, 15/15622-2)

NARDY, MAYSA FREITAS MAINARDES; DE SOUZA, JOSE VITOR CANDIDO; DOS SANTOS, SERGIO FRANCISCO; DE SAMPAIO ALVES, MANOEL CLEBER; RIBEIRO, MARCOS VALERIO; ANTONIALLI, ARMANDO ITALO SETTE; VENTURA, CARLOS EIJI HIRATA. Surface finish and edge preparation of Al₂O₃ + MgO cutting inserts by grinding and their application in hard turning. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 134, n. 1-2, p. 13-pg., 2024-07-25. (15/15622-2, 17/12304-5, 17/12309-7, 18/24614-1)

RUBIO, JUAN C. C.; RICCI, VIRGILIO P.; RODRIGUES, ALESSANDRO R.; KLIAUGA, ANDREA M.; VENTURA, CARLOS E. H.. Cryogenic turning of Ti-15Mo alloy. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, v. 137, n. 7-8, p. 13-pg., 2025-03-24. (15/15622-2, 17/12304-5, 17/12309-7, 18/24614-1)