CV Lattes
ResearcherID
ORCID
Secretaria de Desenvolvimento Econômico (São Paulo - Estado). Centro Paula Souza (CEETEPS). Faculdade de Tecnologia de Sorocaba (FATEC Sorocaba) (Institutional affiliation from the last research proposal) Birthplace: Brazil
graduation at Licenciatura em Química from Faculdades Oswaldo Cruz (2006), graduation at Engenharia Química from Escola de Engenharia de Lorena (2002), master's at Ciência e Engenharia de Materiais from Escola de Engenharia de Lorena (2004) and doctorate at Ciência e Engenharia de Materiais from Escola de Engenharia de São Carlos (2008). Has experience in Material and Metallurgical Engineering, focusing on Physical Metallurgy, acting on the following subjects: titanium, fretting fatigue, fatigue crack growth, contact load and fractographic analysis. (Source: Lattes Curriculum)
| News published in Agência FAPESP Newsletter about the researcher |
| More itemsLess items |
| TITULO |
| Articles published in other media outlets ( ): |
| More itemsLess items |
| VEICULO: TITULO (DATA) |
| VEICULO: TITULO (DATA) |
P20 is the most widely used tool steel for plastic mold fabrication. Usually, the steel for mold are carburized, nitrided or coated when higher surface hardness and better wear resistance, oxidation and erosion are desirable. Together with the nitriding process, the nitrocarburization is considered the most promising engineering techniques to increase the surface hardness and wear resista…
(Only some records are available in English at this moment)
DLC films have been the focus of current research due to their interesting properties such as high hardness, low friction coefficient, and chemical inertness, making them a suitable film for applications in biomaterials. However, these films have some limitations, such as low adhesion to metallic substrates, defects that can compromise corrosion resistance, and structural modification whe…
Study of the development of the plasma paste boriding treatment using as an anticorrosive treatment in 304 stainless steel.
Aluminum alloys are the basis for the fabrication of aircraft structures because they exhibit interesting properties such as low density, adequate mechanical strength when subjected to aging treatment and high ductility. However, its low hardness can compromise wear resistance, while the precipitates produced in the aging treatment can influence the corrosion resistance of the material. D…
(Only some records are available in English at this moment)
| 6 / 4 | Completed research grants |
| 9 / 8 | Completed scholarships in Brazil |
| 15 / 12 | All research grants and scholarships |
| Associated processes | |