CV Lattes
ResearcherID
ORCID
Google Scholar Citations
Universidade Federal do ABC (UFABC). Centro de Engenharia, Modelagem e Ciências Sociais Aplicadas (CECS) (Institutional affiliation from the last research proposal) Birthplace: Brazil
Erik has PhD and master in Manufacturing Engineering and had graduated in Control and Automation Enginnering, at Methodist University of Piracicaba. He was student research assistant at Fraunhofer IPK in Berlin and had also studied at Technical University Berlin in the field of machine tools at IWF institute. Nowadays Erik is Adjunct Professor at Federal University of ABC, Brazil. (Source: Lattes Curriculum)
| News published in Agência FAPESP Newsletter about the researcher |
| More itemsLess items |
| TITULO |
| Articles published in other media outlets ( ): |
| More itemsLess items |
| VEICULO: TITULO (DATA) |
| VEICULO: TITULO (DATA) |
Laser Powder Bed Fusion (LPBF) is a manufacturing technique layerwise performed with the action of a laser beam as the thermal source to give shape to the desired product. It is important to monitor the gas protection during this process to avoid undesirable elements and fumes that may affect the material integrity and performance. In this sense, strategies that allow real-time monitoring…
Additive manufacturing of metallic parts has been expanding as far as defects inherent to the process, which can infer in material's performance, are being managed. The Powder Bed Fusion process is characterized by the successive layers' consolidation through the energy derived from a laser. During the material fusion and layers' structuration, the material is exposed to thermal cycles wi…
Advanced Manufacturing or Industry 4.0 is characterized by a set of technologies that contribute to the development of intelligent industrial processes. Among the technologies that encompass it, additive manufacturing deserves special attention because it provides greater flexibility and efficiency to the productive system. In additive manufacture, various types of materials can be consid…
The fabrication versatility provided with additive manufacturing stands out in the context of automation and integration supported by the 4.0 Industry. Hence, there is a need to look for alternatives to overcome the surface finishing limitations obtained with the additive technology of Powder Bed Fusion (PBF), for example, using milling with adequate cutting parameters. In this sense, it …
The application of Additive Manufacturing (AM) can be observed in a wide range of sectors, including biomedical, oil and gas, aerospace, energy, automotive and others. The advance of the use the AM it is necessary to study the mechanical properties of the products obtained, exploring the freedom of the forms that can be produced. Minimal periodic surfaces provide the construction of struc…
In industry, parameters such as hardness, roughness, microstructure are used for quality control of the machining process. Given the fact that it is usually necessary to move the workpiece to the quality control center to check these parameters, the use of a portable quality control system to be used in the process could reduce inspection time. The micro hardness, roughness, microstructur…
The laser powder bed fusion (L-PBF) technology deals with expressive efforts to improve the process predictability of key final properties, like residual stress. The presence of multiple influencing factors makes it more challenging but also gives the opportunity of improving interest properties. The effects of expressively large temperature gradients observed in the L-PBF process are exp…
| 3 / 3 | Completed research grants |
| 1 / 1 | Ongoing scholarships in Brazil |
| 2 / 2 | Completed scholarships in Brazil |
| 1 / 1 | Completed scholarships abroad |
| 7 / 7 | All research grants and scholarships |
| Associated processes | |