An Alternative Process for Butanol Production: Continuous Flash Fermentation

Author(s)

Mariano, Adriano Pinto ; de Angelis, Dejanira de Franceschi ; Filho, Francisco Maugeri ; Atala, Daniel Ibraim Pires ; Maciel, Maria Regina Wolf ; Filho, Rubens Maciel

• Document type: Journal article
• Source: CHEMICAL PRODUCT AND PROCESS MODELING; v. 3, n. 1, p. 15-pg., 2008-01-01.

Abstract

The objective of this work is to introduce and demonstrate the technical feasibility of the continuous flash fermentation for the production of butanol. The evaluation was carried out through mathematical modeling and computer simulation which is a good approach in such a process development stage. The process consists of three interconnected units, as follows: the fermentor, the cell retention system (tangential microfiltration) and the vacuum flash vessel (responsible for the continuous recovery of butanol from the broth). The efficiency of this process was experimentally validated for the ethanol fermentation, whose main results are also shown. With the proposed design the concentration of butanol in the fermentor was lowered from 11.3 to 7.8 g/l, which represented a significant reduction in the inhibitory effect. As a result, the final concentration of butanol was 28.2 g/l for a broth with 140 g/l of glucose. Solvents productivity and yield were, respectively, 11.7 g/l. h and 33.5 % for a sugar conversion of 95.6 %. Positive aspects about the flash fermentation process are the solvents productivity, the use of concentrated sugar solution and the final butanol concentration. The last two features can be responsible for a meaningful reduction in the distillation costs and result in environmental benefits due to lower quantities of wastewater generated by the process. (AU)