| Full text | |
| Author(s): |
Kabayama, Leonardo Kyo
;
Taguchi, Simone Pereira
;
Santana Martinez, Gustavo Aristides
Total Authors: 3
|
| Document type: | Journal article |
| Source: | MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS; v. 12, n. 3, p. 5-pg., 2009-07-01. |
| Abstract | |
The study of die geometry is vital in determining the surface and mechanical properties of drawn wires, and consequently, their application. In this work, annealed electrolytic copper wire (ETP), with 0.5 mm original diameter was reduced by 19% in dies with 2 beta = 10 degrees and 18 degrees and He = 35 and 50%. The best experimental results were then studied by the Finite Element Method to simulate residual stress distribution. The experimental results show that the friction coefficient decreases as the wire drawing speed increases, and that low 20 and He values bring about the most favorable wiredrawing conditions. The simulation shows a variation in the axial and radial tensions, both for the compression and traction stresses on all regions during the wire drawing process. In conclusion, the influence of the internal die geometry on the drawn wire is clarified. (AU) | |