Effect of cylinder liner wear on the mixed lubrication regime of TLOCRs

Author(s)

Profito, Francisco J. ; Tomanik, Eduardo ; Zachariadis, Demetrio C.

• Document type: Journal article
• Source: TRIBOLOGY INTERNATIONAL; v. 93, p. 10-pg., 2016-01-01.

Abstract

A full-scale mixed lubrication regime model was applied to the contact between a parallel, flat rigid surface and the honed cylinder liner topography of internal combustion engines. The hydrodynamic and asperity contact effects are taken into account simultaneously in the same solution framework. The hydrodynamic phenomena are described in terms of the Reynolds equation and the fluid-film cavitation is modelled by using the mass-conserving p-theta Elrod-Adams approach. The modified Reynolds equation is solved numerically adopting a robust extended Successive-Over-Relaxation (SOR) algorithm based on a finite volume discretisation method. The eventual asperity interactions are determined according to the Hertzian contact theory with maximum elastic pressure limited by the hardness of the softer material. Numerical simulations were carried out in order to investigate the hydrodynamic load carrying capacity and the associated contact pressures produced for a Twin Land Oil Control Ring (TLOCR) sliding against a honed bore. Actual 3D roughness measurements taken at the same point position of the honed liner surface before and after a 100 h dynamometer engine test were used as case study. The ring face was assumed unchanged to focus only on the bore surface modifications. Significant differences were observed in the magnitude of the average hydrodynamic and asperity contact pressures, as well as in the hydrodynamic shear stresses responsible for the viscous dissipations. The asperity contact pressures decreased on the worn surface due to the reduction in the asperity interactions caused by the removal of the highest summits due to wear. On the other hand, the smoothing of the cylinder liner promoted the raising in the hydrodynamic pressures and shear stresses. (C) 2015 Elsevier Ltd. All rights reserved. (AU)

• FAPESP's process: 09/54891-8 - Tribological challenges in flex-fuel engines
• Grantee: Roberto Martins de Souza
• Support Opportunities: Program for Research on Bioenergy (BIOEN) - Research Partnership for Technological Innovation (PITE)