Meta-equilibrium transition microstructure for maximum austenite stability and minimum hardness in a Ti-stabilized supermartensitic stainless steel

Author(s)

Escobar, J. D. ; Oliveira, J. P. ; Salvador, C. A. F. ; Faria, G. A. ; Poplawsky, J. D. ; Rodriguez, J. ; Mei, P. R. ; Babu, S. S. ; Ramirez, A. J.

• Document type: Journal article
• Source: MATERIALS & DESIGN; v. 156, p. 13-pg., 2018-10-15.

Abstract

The maximization of stable reverted austenite at room temperature through inter-critical tempering is a widely used method to reduce hardness in supermartensitic stainless steels. Nevertheless, partial martensitic transformation might occur due to insufficient compositional stabilization. In this work, we conducted a time-resolved triple-step inter-critical tempering, specially designed to obtain maximum austenite stability and minimum hardness through the progressive suppression of the martensitic transformation. The mechanism behind the progressive increase in stable reverted austenite was the generation of a meta-equilibrium state, which imposed a limit in both high temperature austenite reversion and room temperature austenite stabilization. Such limit corresponded to the high temperature volume fraction of austenite, obtained right before cooling from the first cycle. This effect was associated to the Ni-rich fresh martensite laths acting as local Ni compositional pockets, providing site-specific austenite reversion; and to the suppression of any additional nudeation at the Ni-poor matrix as the T0 temperature for austenite reversion was strongly increased. The softening mechanism was mainly controlled by the carbon arrest effect by the precipitation of Ti (C, N), which was completed after the first tempering cycle. Nevertheless, maximizing reverted austenite and suppressing fresh martensite at room temperature did not result in additional hardness reductions. (C) 2018 Elsevier Ltd. All rights reserved. (AU)

• FAPESP's process: 16/13466-6 - Correlative atom probe tomography and transmission electron microscopy on the study of M/A, B/A interfaces and precipitates after in situ heat treatments for a TRIP-assisted supermartensitic stainless steel and advanced high strength steel
• Grantee: Julian David Escobar Atehortua
• Support Opportunities: Scholarships abroad - Research Internship - Doctorate
• FAPESP's process: 14/20844-1 - In situ study on kinetics of phase transformations and thermal stability of retained austenite in TRIP-assisted advanced high strength steel
• Grantee: Julian David Escobar Atehortua
• Support Opportunities: Scholarships in Brazil - Doctorate