Assessment of CO₂ storage prospect based on physical properties of Rio Bonito Formation rock units

Author(s)

Abraham-A, Richardson M. ; Canas, Stephanie San Martin ; Miranda, Isabella F. S. ; Tassinari, Colombo C. G.

• Document type: Journal article
• Source: ENERGY GEOSCIENCE; v. 5, n. 1, p. 10-pg., 2024-01-01.

Abstract

The physical properties of the rock units associated with the Rio Bonito Formation are presented in this study with the focus on modelling reservoir quality based on petrophysics-derived parameters to evaluate CO2 storage potentials. It involves the modelling of the reservoir depths, thicknesses, flow zone indicators (FZI), and effective permeability (K-eff) and presenting the CO2 storage efficiency factors peculiar to the rock units of the study location. Research results presented by this study for the stated objectives are not quite common in the region. K-eff values range from 200 mD to higher than 2000 mD, and FZI values are generally above 1.0 mu m and up to 13.0 mu m within the portions covered by the drilled wells. The sandstone units recorded are up to 20 m thick in some cases. The K-eff and FZI models indicate the sandstone reservoirs as permeable units to support the injection and circulation of CO2 within the potential reservoir units of the Rio Bonio Formation across S & atilde;o Paulo State. Apart from some points in the southeastern part of the study location, where the Rio Bonito are delineated at depths less than 800 m (minimum CO2 storage depth based on best practices), other portions are deeper, ranging from 950 m to 3500 m. Thin-bedded layers will affect the integrity of the rocks as CO2 storage tanks or reservoir seals/traps/overburden within the region. Sandstone bed thicknesses are up to 20 m in some cases. However, hybrid CO2 reservoir units are feasible, especially in portions where thin siltstone layers are sandwiched between sandstone units to provide considerable thicknesses based on CO2 storage standards. The current study shows that useable areas considering reservoir thickness, depth, and other physical qualities will significantly control the CO2 storage efficiency of the study location. Further studies featuring a detailed geophysical exploration of the site to confirm the availability and saturations of pre-existing fluid (hydrocarbon and water) are encouraged to boost CO2 storage in the region. The related research-based results, as mentioned above, may be combined with the results of this research to determine the area's potentials for CO2 storage or hydrocarbon production with CO2 storage options. (c) 2023 Sinopec Petroleum Exploration and Production Research Institute. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/). (AU)

• FAPESP's process: 21/06158-1 - 3D geological modeling applied to CO2 geological storage in Southeastern Brazil
• Grantee: Saulo Batista de Oliveira
• Support Opportunities: Scholarships in Brazil - Post-Doctoral
• FAPESP's process: 14/50279-4 - Brasil Research Centre for Gas Innovation
• Grantee: Julio Romano Meneghini
• Support Opportunities: Research Grants - Research Centers in Engineering Program
• FAPESP's process: 20/15230-5 - Research Centre for Greenhouse Gas Innovation - RCG2I
• Grantee: Julio Romano Meneghini
• Support Opportunities: Research Grants - Research Centers in Engineering Program