Full text
| |
| Author(s): |
Nelson Alexandre Galiote Silva
Total Authors: 1
|
| Document type: | Doctoral Thesis |
| Press: | Ribeirão Preto. |
| Institution: | Universidade de São Paulo (USP). Faculdade de Filosofia, Ciências e Letras de Ribeirão Preto (PCARP/BC) |
| Defense date: | 2016-02-12 |
| Examining board members: |
Fritz Cavalcante Huguenin;
Fabio Henrique Barros de Lima;
Paulo Olivi;
Auro Atsushi Tanaka
|
| Advisor: | Fritz Cavalcante Huguenin |
| Abstract | |
The increasing in energetic consumption and environmental concerning toward rising in the emission of pollutant gases create a favorable scenario to develop non-pollutant technologies and more efficient energy storages. Rechargeable non-aqueous lithium-air batteries possess high theoretical energy density (5200 Wh kg-1), characterizing as a promising system to stationary and electric vehicles applications. However, many issues on the cathode electrode should be addressed to enable this technology, for example, low reversibility of the reactions, low rate-capability and instabilities issues from cathode materials and electrolytic solvents. Here, a kinetic model was employed for modulate the experimental impedance data in order to obtain the rate constants of elementary steps from oxygen reduction reaction (ORR), which allows the investigation of the role of some parameters such as, type and grain size of electrocatalysts, and the solvent influence. The initial investigation were with less complexes systems of platinum bulk or glassy carbon as the working electrode in 1,2-dimethoxyethane (DME)/lithium perchlorate (LiClO4). Based on that, the role of carbon nanoparticles in the ORR was an increasing the oxygen adsorption process, and by slightly increasing (one order of magnitude) the superoxide formation (rate determining step) as when compared with platinum and glassy carbon electrodes due to the presence of side groups acting as mediators to the electron transfer. Nonetheless, a fast surface passivation was observed in function of Li2O2 and Li2CO3 thin films formations, and these films increase the battery overpotential during the charge process (potential difference between charge/discharge >1V). In addition, dispersed platinum nanoparticles (Ptnp) resulted in an increase of two orders of magnitude on the rate constant of the rate determining step when compared to platinum bulk. This can be explained due to changes in electronic properties of metallic d-bands in function of nanometric size. These changes contributed to enhance the energetic efficiency of the practical device when compared to the non-catalyzed system. However, the Ptnp were non-specific toward the ORR catalyzing the electrolyte degradation reactions, and decreasing the energy efficiency faster than the non-catalyzed system. The ionic liquid rather than DME promoted better stabilization process for intermediary superoxide due to interaction between cations present in solution, resulting in an outstanding enhancement of the rate constant for rate determining step (three orders of magnitude) when compared to the same working electrode in DME. In addition, decrease the electrolyte degradation reaction. These factors can improve a higher rate-capability and cycle life of the practical lithium-air batteries. (AU) | |
| FAPESP's process: | 11/12668-0 - Nanoparticulate Materials for Lithium-air Batteries |
| Grantee: | Nelson Alexandre Galiote Silva |
| Support Opportunities: | Scholarships in Brazil - Doctorate |