Wastewater treatment in microbial fuel cell and direct electrical power generation: fundamentals and aplication

Author(s)

Eduardo Dellosso Penteado

• Document type: Doctoral Thesis
• Press: São Carlos.
• Institution: Universidade de São Paulo (USP). Escola de Engenharia de São Carlos (EESC/SBD)
• Defense date: 2016-04-08

Examining board members

Ernesto Rafael Gonzalez; Eugenio Foresti; Marcelo Loureiro Garcia; José Joaquín Linares León; Valeria Reginatto Spiller

• Advisor: Ernesto Rafael Gonzalez

Abstract

In this work the influence of the operational conditions of the microbial fuel cell (MFC) were evaluated in organic matter removal from wastewater treatment and in the power generation. Hypotheses 1, 2 and 3 respectively checked the influences of hydraulic retention time (HRT), of mesophilic and thermophilic conditions (25 °C and 55 °C, respectively) and the recirculation ratio (R) of the effluent in cathode of MFC (0, 1, 3 and 5) in the power generation, microbial adhesion and community and COD removal of membraneless MFC fed with synthetic wastewater based on sucrose. Hypotheses 1, 2 and 3 have been accepted. Reducing the HRT increased the power generation and the dominance in microbial community and decreased the COD removal efficiency and microbial adhesion to the electrode. Long HRT more efficiently removed the organic matter but generated lower voltages. The thermophilic conditions yielded a more dominant microbial community that favored power generation compared with the mesophilic conditions because of reduced microbial adhesion to the electrode. The COD removal efficiencies were higher under mesophilic conditions than under thermophilic conditions due to the higher apparent kinetic constant at mesophilic conditions (0.083 h-1) than in thermophilic conditions (0.035 h-1). Increasing the R improved the power generation and the COD removal, because the mass transfer in the liquid medium for microorganisms was improved and the biomass adhered to the cathode electrode decreased increasing the voltage. In Hypothesis 4, the use and effect of HRT in treating sugar cane vinasse in membraneless MFC operated at thermophilic conditions were evaluated. The CCM was able to remove the COD of sugarcane vinasse and generate electricity directly, confirming the hypothesis 4. Hypotheses 5, 6 and 7 assessed the influences of COD, nitrogen and phosphorus ratio in winery wastewater, of sludge retention time (SRT) and of electrode configuration in dual chamber MFC. Hypotheses 5, 6 and 7 were adopted. The misbalance between COD, nitrogen and phosphorus from winery wastewater is a major obstacle to the use of this technology and COD:N:P ratio of 700:10:1 had high potential to generate power in MFC, although it is not effective in removing organic matter. The power generation increases with the reduction of the SRT, since there were the selection of bioeletrogenic microorganisms and increased the volumetric organic load rate reducing competition for substrate. However, the SRT did not affect the removal of organic matter, because only a small part of COD was removed regardless of SRT. Physical characteristics of the electrode as porosity, roughness and the electrode area density and the biocompatibility of the electrode are key factors to increase the performance of CCM. The carbon felt was the best studied material having the highest values of porosity, roughness and the electrode area density. (AU)

• FAPESP's process: 11/23026-0 - Wastewater treatment in microbial fuel cell and direct electric power generation: fundaments and application
• Grantee: Eduardo Dellosso Penteado
• Support Opportunities: Scholarships in Brazil - Doctorate